...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #11  
Old 05-31-2014, 05:17 PM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 18 Times in 12 Posts
Default

Quote:
Originally Posted by 69MyWay View Post
Running a stock pcv system on a slightly modified hose since the valve covers are not stock. Drove home okay. No odd noises and the needle back where it belongs.

I am slap in the middle of taking the frame out of our 2014 silverado 4x4. That is a long story. Anyway hope to get the cab off today and by the end of next week have it running again. The. I will have some time to check out the camaro. I would bet my pcv is contributing but it is all hooked up.
Reason I asked, I bought a used 99 Firebird and I got it cheap cause he had the same symptoms you are having. He assumed it was the engine. Blue smoke 1 qt oil every 900 miles. I was gonna do an engine swap so I didn't care.

Did an oil change and when I pulled the air boot to clean the throttle body I pulled a bunch of oil out of it. The throttle body was caked with oil residue. So I pulled the intake and tipped it up for a few hours and got almost a half quart out of it.

Cleaned the intake out, changed the cracked PCV hoses, changed the oil and I never had an issue after that. Held oil till 3000 miles, no smoke and oil consumption issues. I ended up selling the car cause it ran good and a huge profit never hurt anyone.
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote
  #12  
Old 06-01-2014, 06:01 PM
Rick D's Avatar
Rick D Rick D is offline
Senior Member
 
Join Date: Jun 2005
Location: Third Rock From the Sun!! 😃
Posts: 3,437
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by 69MyWay View Post

I am slap in the middle of taking the frame out of our 2014 silverado 4x4. That is a long story.
Ok I have to ask ^^^^^ why are you taking the frame out of your 2014 truck??
__________________
Rick

[SIGPIC]https://neversaynever0304.files.wordpress.com/2014/07/you-didnt-see-anything.gif[/SIGPIC]
Reply With Quote
  #13  
Old 06-01-2014, 07:32 PM
INTMD8's Avatar
INTMD8 INTMD8 is offline
Senior Member
 
Join Date: Mar 2010
Posts: 376
Thanks: 1
Thanked 7 Times in 2 Posts
Default

Quote:
Originally Posted by GregWeld View Post
My first guess is the intake manifold "upgrade" has you running pig fat - and you've glazed the cylinder walls - so now the rings aren't working and you're blowing oil past them. It was noticeable at start up because it's even fatter (richer) on cold start up.

Start planning for a rebuild - motors aren't self-healing.
Just swapping the intake usually doesn't effect fuel trims/air fuel ratio much.

Even if it did, as long as the o2's were functional it would at least still run at stoich under closed loop if it is within the range of the fuel trims. (and unless there are other problems it would be).
__________________
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 650rwhp @7250 510rwtq @5700. 95 F355. 96 Carrera 4S. 59 Cadillac series 62 convertible.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net