Really need some help

[bret]

Originally Posted by redsand

Been getting different answers and need to confirm with the team here that have run the following to 100 percent confirm

69 camaro
Dse mini tub
Ride tech 4 link
Has anyone successfully run a 335 tire with an 18x12 wheel without rubbing.
Some searches I have found where Bret said yes, they have run a 335 and had some answers saying the g r/s givaway car had them but there was some rubbing

I just need a 100 percent confirmation if anyone is running the setup with a mosier 12 bolt stock length

Also what backspacing did you run in the rear??

Any help would be extremely appreciated

I'd like to see the posts that refer to rubbing issues on the Goodguys Camaro. . I built that car. Nothing rubs. Anywhere. Ever.

[redsand]

Bret IM me when you get a chance.... I have a feeling that there is some confusion between the givaway car and the 48 hour camaro but not sure

I am starting to think it is the tire..... It is a BFG kdw 2 amd appears to be measuring more than a 335. If we stuff it in the wheel well even with the dse mini tubs there is very little room if any....at this point we are going to roll the qtr lips and move the mounts inboard a bit for clearence.

[71RS/SS396]

Something is not right. My wifes 69 with DSE tubs and has plenty of room with 335 Rivals which are wider than KDWs, the lips are not rolled either. Does the tire fit without the 4 link bars bolted on?

[redsand]

It does but it is very very tight