vintage air ez clip fitting size vs crimp

[snappytravis]

I ordered everything from hose warehouse, The only problem is they make a ton of different ones.. you can buy clip kits as well, and the pliers off amazon. I had crimp hoses on everything and changed everything. I installed the high and low pressure ports on the bulkhead and one on the drier. Then I just have regular 90s on the compressor with no valve. It looks half way decent. Good luck

[wiedemab]

Kevin -I may have misunderstood. I just bought the crimp tool and cage clips kit/box. I bought all of my fittings individually.

[kevin_l]

Originally Posted by snappytravis

I ordered everything from hose warehouse, The only problem is they make a ton of different ones.. you can buy clip kits as well, and the pliers off amazon. I had crimp hoses on everything and changed everything. I installed the high and low pressure ports on the bulkhead and one on the drier. Then I just have regular 90s on the compressor with no valve. It looks half way decent. Good luck

This sounds like my best option at this point.

Originally Posted by wiedemab

Kevin -I may have misunderstood. I just bought the crimp tool and cage clips kit/box. I bought all of my fittings individually.

Ok, yeah I thought you meant the va ez clip kit with hoses. So you sourced the hose and fittings separate, and bought the clip kit. Thanks for the clarification. I noticed they sell serveral fittings of each size. I'll have to see what the differences are.