I forgot to take pictures the DSE SFC install. It was easier than the mini tubs but not the easiest job I have ever done. Im was working on the brake lines and starting to plan the fuel lines when the project took a little bit of a left turn....
Needless to say the single pump vaporworx setup was not going to be enough. The motor is a 6.0 Iron block with forged pistons, stock rods and stock crank. Here is the fun part..... its 11:1 compression so I am going to run it on e85 and hope I can turn the timing back to run it on 93 if take a longer trip.