67 Camaro - Dad and Son build

[boostin05blacks]

Well Ill give a bit of history on the car and will try to update as we go, have problems, questions ect. The car was a plane jane 1967 camaro that has been in my family since 1969. My grandfather worked for GM his whole life and in 1967 when the camaro came out a manager at where my grandfather worked got a 1967 camaro in butternutt yellow with a 327, powerglide and not to many options. Well in 1969 when the body was revised that manager wanted to get a 1969 camaro. So his 1967 was then put up for auction and my grandfather having 6 kids all around the driving age put a bid in of $200 for the car. Well as the story has it he won the car. My dad tells me stories of when my grandfather brought the car home and he wanted the car. The car was then passes along the girls (my aunts) up untill 1991 where it was then parked. My dad always told himself that one day he would have the car. Around 2000 me and my dad went and picked the car up from my aunts house. We picked at the car little by little not really knowing where to start. Up untill now.

I have been doing alot of research and I think/hope these are going to be the final plans for the car. I will be getting pictures up the next time I am at the car. We plan on holding off on the body as it pretty much needs everything at this point and we have decided for this summer to try to tackle the mechanical stuff and make the car a great driver first. Please if you have some opinions/comments share. Input is always a good thing. The goal for the car is going to basically be a great cruiser with a couple of dragstrip trips in store and mabye road/auto course later down the road. We want to be able to run at least mid-low 11's with the car. Around 550-600 wheel. With that in mind..here is the current list..and the current wish list for the car.

Current:

LSX 454 GMPP crate motor
FAST lsxr 102 intake
FAST Fuel rails
Nick Williams 102mm Throttle body
C6 Front Accesory drive
Mast Motorsport Oil pan
S&P Motor adapters
Energy Suspension motor mounts
Energy Suspension Poly Kit
Speed tech solid aluminum body mounts
Custom subframe connectors
QA1 front coil-overs
Corbeau CR1 Front seats
Forgeline DS3- 18 x 8.5, 18 x 12
Wilwood 12.1 drilled/slotted -6 piston(front) 4 piston(rear)
Ricks Stainless Tank (efi)
Moser 12 bolt ( 35 spline, wavetrac, 3.73)
prodigy 4 link w/ QA1 coil-overs
DSE mini tub
6 point custom cage
Anvil Carbon fiber (cowl panel, header panel, front spoiler, hood, trunk)



Wish list:

T56 Magnum 6-speed kit
Anvil Carbon fiber (rear spoiler)
Stainless brake lines
225-245/40/18, 335/30/18 tires
Headers
Wiring Harness, ecu, sensors, ect..
Injectors

Stuff for sale:

Rs fenders(original)
Cowl panel (original)
Doors (original)
ls2 engine covers (shaved)
NOS gm 2" cowl hood