Ls-2 Engine For Sale With Computer Together Or Part Out

[fesler]

I think the harness is sold but I do have the engine set up and headers. I will sell the engine for $4000 Shipped and $300 shipped for headers. Headers have never been run but have been used as mock up so they are not in perfect condition. They are coated

[fesler]

OK I am going to fully build this engine up with a Cam and new heads so will be pushing around 550HP. If you are interested before the build and want it as it sits let me know if not I will start it in about a week.

I can build it to any spec you need or HP just depends on how much $$$ you want to spend. Will be a really nice 550HP engine for a great deal. let me know please and can get the tranny to go with if you need.

[CornHusker4Life]

Chris

I am interested. Sent you an email not a pm.

Jarrod

[fesler]

Originally Posted by CornHusker4Life

Chris

I am interested. Sent you an email not a pm.

Jarrod

Please email me again not sure I got it. thanks

[CornHusker4Life]

I replied to the email you sent. I will call the shop tomorrow

[fesler]

OK so change of plans on this engine doing a full build on it now to an all aluminum 6.2L engine with everything new on it.

This will be putting out over 550HP now and will be a sick engine build, new cam, heads, pistons, machine work and computer and harness. I will sell this engine complete with harness and computer for $7000 retail on this build will be over $8500 or just put it in one of my shop builds.

I can also sell you the tranny and engine mounts you need for your ride so let me know if you are interested in a built engine and we can build to your spec. Machine work is being done now

[fesler]

Engine is together and ready to ship if you are looking for a built 6.2L all alluminum engine ready to roll better than LS-3 power I can ship next week.

Machined block
LS3 GM performance heads, rocker arms and stands
New GM Performance Lifters
New Engine Bearings
New Meling HV Oil Pump
New Timing Chain
New Head Gaskets, rear main seal and front balancer seal
New head bolts
Built Cam new cam bearings
Mahle LS3 Pistons and Rings
LS3 Intake
complete assembly and live run tested finished and ready to ship.
Harness and Computer ready to go

If you are looking for the perfect engine for your project email me [email protected] I can also add in a transmission and all other parts you may need for a killer deal.

[eliterides]

Hey Chris,
do you have the stock LS2 intake and 4 complete injectors , I had a fire on my shop truck build and need to find these replacement parts at a good price.

Can you help?


John
Elite Rides Garage

[31069ss]

Wish I had the money super good deal

[randy]

send me a price for this and a t56 ready to drop in and run