well its been awhile i got the body work 99% done and its all primed on color now, sure dose make a difference looks like a car now. sence $ is low i have not done much other than the body work. i still need a drive shaft, front brake lines,front window, and a buch of little things.
if i can get the windows,headliner,brake lines,drive shaft and,the front coilovers installed yes. but i dout ill have that all done. the next show it will deffenantly be there even if i have to push it lol
Quote:
Originally Posted by 67turbostang
nice car! r u taking the car to the good guys show in march?
well looks like the car might be at the show this month, i got the front suspention all set up and the driveshaft was made and installed.ran all my brake lines but i am having a problem with no brakes, i have a real soft peddle and it gose to the floor and we bleed the lines several time. also i need to get a vacum canister right as i fired the car up the brakes went real soft. BUT! the car did drive down my street! so all i need to do it paint the window chanles get the glass and headliner installed and mount the seats and i should be there so we will see
well looks like the car might be at the show this month, i got the front suspention all set up and the driveshaft was made and installed.ran all my brake lines but i am having a problem with no brakes, i have a real soft peddle and it gose to the floor and we bleed the lines several time. also i need to get a vacum canister right as i fired the car up the brakes went real soft. BUT! the car did drive down my street! so all i need to do it paint the window chanles get the glass and headliner installed and mount the seats and i should be there so we will see
i got the car to the show what a pain in the ass it was to get it back together in a week when parts were out being blasted and what not. drove good had a cupple little problems like running a little hot 210 nothing to bad and the tranny is slipping so ill have to get it rebuild. here are some pics of how the car is now. also here is a exhaust clip its 3in into a x pipe into dynomax bullets dumped befor the rearend
well i have not updated this in a while. not much has chaged but i do have some good new i finally got the cowl welded on to the hood,i have a guy coming out to do the rest of the body work and to paint so i would say the car should be in color by the end of next month. ill take some pics of the hood today and post them up. ill also take pics as we move thought the body and paint stage. wish me luck!!!!!!!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
1979 Trans-Am Ls1 project
Linear Mode
