2nd Chance Camaro - Let the Project Begin - Page 237 - Lateral-g Forums

**89 RS** · #**2361** 04-10-2024, 09:42 PM

Quote:

Originally Posted by syborg tt

I love having tools that have been past down as I feel the people that gave them to me are with me when I am in the garage.

It's a 14" wheel which fits me perfectly when I am sitting in the car.

https://screamingchicken.com/1970-81...ing-wheel-kit/

Best part is they are a site sponsor.

I agree 100% on feeling like the ones who passed down the tools are with me when working in my garage.

Good deal on the steering wheel.

Sent from my iPhone using Tapatalk

**fleetus macmullitz** · #**2362** 04-20-2024, 06:05 AM

MJ,

Obviously you’re very busy, but how about an update?

**syborg tt** · #**2363** 04-20-2024, 10:17 PM

So things have been crazy at work and at life. I finally got out to the garage and decided to make sure the brakes were lubed and ready to go.

Wheels coming off

I really like the new tires

I need to get the front end up and wow did the car settle a little bit.

What ever works

I am happy that I went with the Kore3 brakes from Tobin.

Sooner or later I will put the center caps back on.

Drivers Side is complete

Might as well grease the Upper Ball Joints !!!

Back together

**syborg tt** · #**2364** 04-22-2024, 03:14 PM

So, I ordered a couple fittings for the intake tube and this came in the mail.

Holy crap it looks like an E D Package !!!!

Honestly, I saved the packaging and showed it to my wife so she would know what the heck it was just in case she saw it in the garbage.

I also received the parts I needed to work on the bike for the side of the car.

I found a really old 10 Speed Cassette that needed a serious cleaning.

Cleaned up

**syborg tt** · #**2365** 04-22-2024, 04:02 PM

So I thought I was going to work on the interior and well

However, I decided to move the set back plates under the carpet.

Quick trip to Home Depot

Well, thankfully I starting doing a nut and bolt check and I found that I forgot to install the nuts on the Vintage Air bracket.

Going back to the set back plates.

Cleaning Up the wire looms

**syborg tt** · #**2366** 04-22-2024, 04:29 PM

It has been a crazy couple weeks and I have not had a free moment to work on the car.

Finally, Yesterday I decided to go out to the garage !!!

First up trim the carpet on the Drivers Side.

Choppy Choppy

Test fitting the Kick Panel

**syborg tt** · #**2367** 04-22-2024, 04:40 PM

My plan is to ride today so I decided to make a Taco Run as I new I wanted to Ride today.

Never, did I think this was going to be a big job. I figured it would take a few minutes. Boy was I wrong and thank God the seats were not in the car.

First one is in and it will be feeding the center of the lower dash.

Well, this sucks and I can't find a Band-Aid !!!

Electrical tape to the rescue.

Routing the duct work up to the underside of the dash. I used yellow zip tie's so I can seem them if I ever have to cut them.

The Mag Daddy Magnet mounts worked great under the dash.

Once, I drive the car around a little bit I will most likely install the lower dash that Kenny build.

However, I plan to paint it wrinkle black.

Instead of cleaning up my mess I decided to take Remy for a walk.