SEMA ‘25, old & newer rolling works of #toxicmasculinity...

[fleetus macmullitz]

[fleetus macmullitz]

Story… https://fuelcurve.com/1968-camaro-metal-brothers/

[fleetus macmullitz]

[fleetus macmullitz]

https://youtu.be/TgHZphwYCHY?si=uZTJTxAeBYOu6LRz

The relevant part starts just after the 12min mark…just wild.

The builder… https://www.amw4x4.com/

[214Chevy]

Originally Posted by fleetus macmullitz

Those T-tops are nasty. Some didn't like them, but I LOVED them.

[fleetus macmullitz]

https://youtu.be/tppEUc6hK5Q?si=mTo7MN90EEWTCy6T

3min 45 sec vid.

[fleetus macmullitz]

Story: https://fuelcurve.com/heath-till-1968-camaro/

This is the same 2016 Ridler winning shop that built Greg Weld’s ‘33…

[fleetus macmullitz]

Thoughts pro or con on the 2nd gen tail lights and the front end treatment?

[Juggernaut]

Originally Posted by fleetus macmullitz

Thoughts pro or con on the 2nd gen tail lights and the front end treatment?

ha, I was thinking "those wheels are pretty sweet!" and skimmed right over the second-gen bodywork.

I like the tail lights, but not so sure about the front.

[Ketzer]

Originally Posted by fleetus macmullitz

Thoughts pro or con on the 2nd gen tail lights and the front end treatment?

The tail lights look out of place...but probably only because I know what should be back there.
Not sure I understand the red front turnsignals, but the grill looks like a very expensive billet piece...I think if the openings were smaller and more of them?

But there's zero wrong with how it presents, only since you asked specifically I'm being very nit-picky on an incredibly beautiful build.

Jeff-