No flow of water in new LS3

[vstol]

Originally Posted by dhutton

What temperature sensor is your engine controller using? Are you using the GM controller?

Quite often guys use two sensors, one in each head.

Don

gotcha

[vstol]

Well I checked even further about the gauge and on Auto Meter's web site they list the same symptoms I was having to a bad ground. Long story short it is a bad ground. I changed the ground and the gauge stayed at 210 while the water was boiling. Thanks for all your help, I will know tomorrow or so when I crank it back up.

Note to Badazz I run the sensor on the ps side in the rear as well.

http://www.corvetteforum.com/forums/...ica-kinda.html