1978 Mustang II restomod - Page 3 - Lateral-g Forums

GPR · #21 12-06-2015, 02:31 PM

I finished the bodywork in the engine compartment and sprayed a couple coats of SPI black epoxy. Next day I sprayed SPI Turbo urethane primer.

GPR · #22 03-30-2016, 05:21 PM

I started working on my II again. I painted the back side of the doors

GPR · #23 03-31-2016, 11:45 AM

Two coats of SPI white epoxy. A little wet sanding and this weekend it will be SPI Orange

GPR · #24 04-02-2016, 06:25 PM

Three coats SPI Orange and three coats of SPI Universal clear.

GPR · #25 04-10-2016, 01:37 PM

I had not planned on putting the Mustang II on a rotisserie but the more I thought about it I could not just leave the undercarriage looking like this. Brian and I (mostly Brian) fit it on the rotisserie yesterday.

GPR · #26 04-10-2016, 03:35 PM

Yesterday I sprayed 3 coats of SPI orange waiting 45 min between coats and today I sprayed 3 coats of SPI Universal clear waiting 30 min between coats.

**WSSix** · #27 04-10-2016, 09:59 PM

You're going all out on this Mustang II, Rusty. It's going to be great when finished. I was at the Coker Tire show last weekend. There was a King Cobra present. Looked great. I can't remember the last time I saw one of those in person.

GPR · #28 04-14-2016, 06:03 PM

The seats came in today from Mustangs Unlimited still waiting for the seat tracks

GPR · #29 05-04-2016, 11:16 AM

Last weekend I decided it was time to spray a couple coats of SPI black epoxy on the undercarriage

GPR · #30 05-14-2016, 02:47 PM

Today I painted the hinges. I know its not a lot of progress but you can't install the doors, hood or rear hatch without them