5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!! - Page 4 - Lateral-g Forums

USAZR1 · #31 08-31-2005, 02:50 PM

Nice to see another protrucker being built,Marty. What size rear tires are you shooting for? How big a wheel tub?

**syborg tt** · #32 08-31-2005, 03:43 PM

Quote:

Originally Posted by USAZR1

Nice to see another protrucker being built,Marty. What size rear tires are you shooting for? How big a wheel tub?

18 x 8 SLG20 Soft Lip Wheel -- 225/45 18 BFG KDW-2

20 x 10 SLG20 Soft Lip Wheel -- 295/45 20 BFG KDW-2

The tubs were hand made so i am not sure how big they actually are. The one thing i can say for sure is that they are very tall because the trucks sits only 4" off the ground.

**syborg tt** · #33 09-01-2005, 05:50 PM

Well the truck is finally back on the ground - Hard to believe. Did i mention that it even rolls and steers

This was the final piece that need to get added to the frame.

Picture of the transition between the old frame and the new tube frame.

yep it's low - 53" to the top of the roof

hay stop looking at my rearend

**syborg tt** · #34 09-01-2005, 05:51 PM

Here's my new Stainless Steel Exhaust from Stainless Work. Man is this stuff top quality and the prices are unbelievable

My new Mufflers

And even a flex Joint in stainless steel.

race-rodz · #35 09-01-2005, 07:10 PM

Quote:

Originally Posted by syborg tt

yep it's low - 53" to the top of the roof

better work on that..... it aint too low untill the tires dont touch the ground

**syborg tt** · #36 09-16-2005, 04:11 PM

Okay couple more updates on the GT. It's actually starting to look like something.

Here is the new location of the Master Cylnder. We moved it up as to increase the pedal ratio to 7 to 1

It's hard to see in the picture but the rod is at the highest pedal position

**syborg tt** · #37 09-16-2005, 04:12 PM

Finished the welding of the roll bar. The rectangular brace in the center is bolted to the chassis.

Soon to be new firewall mods, Going to make everything even and symetrical

**syborg tt** · #38 09-16-2005, 04:23 PM

Finished the welding of the roll bar. The rectangular brace in the center is bolted to the chassis.

Soon to be new firewall mods, Going to make everything even and symetrical

**syborg tt** · #39 09-16-2005, 04:33 PM

Here's my new shaft - Thanks John. We should now have ample clearence for the headers

**syborg tt** · #40 09-16-2005, 04:34 PM

New Aluminum Trans pan from Bowler Transmission. WOW !!! is this thing huge