Hey Everyone New Guy Here With Another 69 Camaro!

[JMitch19]

Good to see another Michigan car coming together. Hopefully I'll run into you at some local events once you have it on the road.

[b757jetdr]

Originally Posted by JMitch19

Good to see another Michigan car coming together. Hopefully I'll run into you at some local events once you have it on the road.

Hey Jason that sounds like a plan for sure! I am hoping for next summer but I could be all wet with that plan!

[frankv11]

Very nice work on that trans crossmember

[Musclerodz]

Cool Camaro project and Ercoupe. Used to have an "E" model along with a ton of parts before I sold it all to someone who liked Ercoupes more than I did.

[b757jetdr]

Originally Posted by frankv11

Very nice work on that trans crossmember

Thanks for the thoughts on that trans cross member it is really turned out nice! But I can't take the credit for it, wish I could though The guy at the shop I use is a great fabricator. I don't have time or tools to do all the fab work between this project and my new one which I will do all the work on!!

[b757jetdr]

Originally Posted by Musclerodz

Cool Camaro project and Ercoupe. Used to have an "E" model along with a ton of parts before I sold it all to someone who liked Ercoupes more than I did.

Mike, Cool to hear you had a ercoupe, mine is a 415-C model. I am heading over right now to start getting it all unpacked from trip home and get all the boxes of parts sorted. I have a split elevator from a "E" model to put on it which I have found from my research is a pretty desirable mod!.

As for the Camaro project it is comming along nicely I have got a great small shop doing all my fab and paint work. I don't have the time or tools to do everything on the car with my crazy work schedule. I do go over and help with what ever I can right now and plan to be doing more when it come to putting the thing together. Fabrication requires welding which I don't do well, if you need a hole burned through some metal I am your guy!
I work on airplanes for a living and if I need welding done it gets contracted out to a certified aircraft welder!

I was lucky to get hooked up with a member on here that has a small shop, Billy Utley (B&B Claasics) now I know the car is going to be SICK!!!

[Jay Hilliard]

Looking great Chris. Keep the pics coming.

[waynieZ]

Originally Posted by Jay Hilliard

Looking great Chris. Keep the pics coming.

I agree!

[DFRESH]

Another sweet 69 done right! That Auto Rad support is super sweet---that's on my list of mods as well---congrats on all the great progress bro---will keep watching for more.

Doug

[Musclerodz]

Originally Posted by b757jetdr

Mike, Cool to hear you had a ercoupe, mine is a 415-C model. I am heading over right now to start getting it all unpacked from trip home and get all the boxes of parts sorted. I have a split elevator from a "E" model to put on it which I have found from my research is a pretty desirable mod!.

As for the Camaro project it is comming along nicely I have got a great small shop doing all my fab and paint work. I don't have the time or tools to do everything on the car with my crazy work schedule. I do go over and help with what ever I can right now and plan to be doing more when it come to putting the thing together. Fabrication requires welding which I don't do well, if you need a hole burned through some metal I am your guy!
I work on airplanes for a living and if I need welding done it gets contracted out to a certified aircraft welder!

I was lucky to get hooked up with a member on here that has a small shop, Billy Utley (B&B Claasics) now I know the car is going to be SICK!!!

If Bill is doing it, you will have a well built sick ride when done.