Camaro X

[zbugger]

I'm so disappointed in you.... You didn't take any detail shots at all.

I'm afraid to ask what that big block in the garage goes into though.

[Damn True]

Simplicity perfectly excecuted.

Tough to beat.

[Steve68]

Anybody got a ideas on the mufflers????

What was done to the motor, ie cam specs??

[trapin]

He left the motor stock.

[Payton King]

Did he use a stock harness for the LS7. If so, did the race pak intergrate with the stock harness?

what are the 3 ports for on the right side of the dash? and finanlly what is the digital gauge in the lower center of the dash that is red and what are the ports for next to it.

Any insight would help

[camcojb]

Originally Posted by Payton King

Did he use a stock harness for the LS7. If so, did the race pak intergrate with the stock harness?

what are the 3 ports for on the right side of the dash? and finanlly what is the digital gauge in the lower center of the dash that is red and what are the ports for next to it.

Any insight would help

I believe he used the MEFI4 computer with a custom harness. That is popular in the marine engines and more of a universal setup, plus he had data on tuning to start with from engineers at his work. The harness was likely custom, but not positive.

The digital gauge is an a/f meter, and the two round ports are 12V taps for a laptop or other accessory (I believe). The three ports on the right of the dash look like the a/c controller if I remember correctly; they're knobs not holes.

Jody

[Payton King]

Did you like the race pak set up?

[rwhite692]

It really has a very sanitary, unemotional, "clinical" feel to it. The blacked-out tail panel looks nice, really sets the rear of car off well and I like the wheels. I'm not too keen on the black painted headlight surrounds, but that's about the only criticism I have...An endura bumper up front would be a big improvement over the painted steel one, IMHO. Great looking car, Mark!

[Ricochet]

Originally Posted by zbugger

I'm so disappointed in you.... You didn't take any detail shots at all.

I'm afraid to ask what that big block in the garage goes into though.

The big block is for Red Witch. That car has been on the back burner while getting this car together. He plans on getting back on it soon...

[Reckley]

Originally Posted by Payton King

Did he use a stock harness for the LS7. If so, did the race pak intergrate with the stock harness?

what are the 3 ports for on the right side of the dash? and finanlly what is the digital gauge in the lower center of the dash that is red and what are the ports for next to it.

Any insight would help

I asked Mark this exact question. He said he used a computer from UMI and it came with it's own harness which connects to the racepak nicely. He may have cusomtized some, but I'm not sure. I do know that it looks really cool inside the car while at idle.

Mike