Project "Payback" - Page 51 - Lateral-g Forums

**Flash68** · #**501** 03-20-2009, 02:27 AM

Lucky you were only doing 50 in that 35.....

**Spiffav8** · #**502** 03-20-2009, 02:31 AM

That looks like about $150.00....that sucks.

If you get one from LVMPD let me know right away so I can try and work some magic for you. Sorry but Henderson is beyond the range of my voodoo.

Vegas69 · #**503** 03-20-2009, 10:27 AM

I got one of those in December too.

The radar detector may have to come to fruition.

**tones2SS** · #**504** 03-20-2009, 02:31 PM

That sucks.
I bet it's tough to keep off it in that mean, black machine!!!

awr68 · #**505** 03-20-2009, 08:27 PM

Quote:

Originally Posted by 98ssnova

Leave me alone Curtis, Anthony said to be nice so I am jerk.

Sorry, that was not directed to you, 68 blackbeauty was really pushing it and I guess I should have been more specific. Again sorry, you are an asset to this site and I agree with what you had to say to him!

Lenie · #**506** 03-23-2009, 09:53 PM

Quote:

Originally Posted by Vegas69

For you guys running the DSE sub. Do yourself a favor and have them weld on the Z bar bracket. The inner fender makes this a real pain in the you know what. It's tapped and done right but......it was a last minute change. The clutch rod etc. is on the top of the list. She is a dirty pig right now and needs some touch up. Somehow the inner fender got all scratched to **** on the way here. Of course no steering was probably the cause.

The boys over at ATS have been treating me right. Here is the solution to my crossmember issues. They modified it with one of their T56 crossmember ends and moved the center bracket slightly. Of course it still needs painted. ATS is top notch. Highly recommend them.

I added fuel tonight to prime the fuel system and check for leaks. I had 4 leaks. Two at the carb bowls and the fitting on both sides of the pump. I used a pipe dope and the fuel ate right through it. Lucky me!! I had to disasemble all the fittings with the dope and replace it with tape. It's all fixed now but what a mother ######. The carb leaks were caused by a frankly crappy design. They used two gaskets with my high dollar fuel rail. I used the gaskets and tape and it's not leaking anytime soon.

Got a question for you, pm sent.