Mali2ude final build for Power Tour 08

[camcojb]

well, changed the iso setting and the camera is fine for me now. Took a couple of pics of the Recaro drivers seat; still waiting on the passenger bracket. This was the first thing in a long while that bolted on without mods, amazing.

I had Shawn Katt with Gearhead Garage recover them to match the rear seat. At the time we were doing an old-school look so I had him remove the headrests, but after Power Tour I'm going to have them put back on.

Thanks again to Terry at Griffin Motorwerke for the brackets (also where I bought the seats). Something fit...............

[DOOM]

Jody,what car are your seats out of ?? Also did they have headrest?? Sorry to keep bugging you! Im just blown away by this car!!
Mario

[camcojb]

Originally Posted by DOOM

Jody,what car are your seats out of ?? Also did they have headrest?? Sorry to keep bugging you! Im just blown away by this car!!
Mario

you're just looking at the pics, huh??!!! They are Recaros, aftermarket seats. They had headrests which we removed for the theme of the car at the time; that of course changed and the headrests are going back on.

Thanks!

Jody

[awr68]

Coming together nicely! Do you have a removable harness bar?

[camcojb]

Originally Posted by awr68

Coming together nicely! Do you have a removable harness bar?

why yes I do................. and it even clears the seat!!!!!!!!!!

Jody

[camcojb]

well, finished up the a/c lines the other day, and replaced my Hotchkis uca's with some from Mark at SC&C. Needed Marks as I had no room for camber adjustment with the downtubes from the turbos. Nice stuff, did a quick alignment and will finalize when the wheels and tires arrive Wednesday.

[BRIAN]

Is there a crossbrace on that upper control arm that hits the bumper at full drop? Just asking because I had a similar set on a 1st gen F and I had to relocate bumpers to work.

Car looks sharp. Put small front and rear headrests it will look stock and save your neck in rearended.

[JND]

Could not be coming together any better, well done, i look forward to viewing your updates.
Joe

[camcojb]

Originally Posted by BRIAN

Is there a crossbrace on that upper control arm that hits the bumper at full drop? Just asking because I had a similar set on a 1st gen F and I had to relocate bumpers to work.

Car looks sharp. Put small front and rear headrests it will look stock and save your neck in rearended.

no interference on this one, but I think Mark had modded the frame area for clearance before I got it.

The headrests are going back on after Power Tour.

Jody

[7TSS]

I think he's referring to the bump stop for the uca at full suspension droop.
I believe that the SPC's don't have any provisions for the bump stops.

Btw the build is simply bad@$$. Can't wait for the wheels to get there so we all can see it completed. I know alot of us are following this build closely and are just as anxious as you LOL.