My 69 Camaro, "Project Stance"

[DFRESH]

More updates from Fab 53

Originally Posted by 67zo6Camaro

The main focus for this exhaust is based around the fact that his car sits so slow. I had made the floor channel cut outs to be able to use 3" tubing under the rear passenger floor area.



Up front Doug opted to use the SpinTech oval exhaust tubing. This is the "3 inch oval" which is actually 2.25" tall and 3.5" wide.







With a little extra work, I was able to get this 3" exhaust up high enough to hide it about 1/2" up in the frame rail. Good news for those low speed bump drags... only frame will scrape now. lol

[tubbed69]

That's amazing work,I need that clearance for these WV roads I drive on.

[67zo6Camaro]

lateral-g

[FETorino]

Originally Posted by 67zo6Camaro

Well, I delivered Stance back to Doug last night. I was able to finish re-installing the rear suspension and exhaust, and update his brake booster and clutch master. The sheet metal work will be slated for another date, that way He can get out and drive her a bit. Enjoy.


Thanks again Doug for letting me work on your project.
Brett

Stop holding out. Let's see the finished exhaust.

It's both amazing and a shame you can't see it on the car.

[67zo6Camaro]

lateral-g

[FETorino]

Originally Posted by 67zo6Camaro

A few more of the underside.

$$$$ Shot

[Sieg]

Is that exhaust as potentially loud as it appears?

[fleetus macmullitz]

Congrats Doug and Brett.

No project can be successful without proper direction...anyone can see that is Doc Dub's strong suit.

[89 RS]

Looks great, nice work Brett. Alright Doug, time for a drive-by vid with the Camaro to hear that exhaust.

[Rick D]

Looks AWASOME Doug!!! Brett knocked it out of the park!!