70 Camaro project

[waynieZ]

I love that gauge set up! The dash is going to be sweet!

[Sheck44]

Steve ... wow

[Beechy]

[QUOTE=slenning;634821][QUOTE=Beechy;632279]

Hi Jim thanks for the suggestions, I have included a new drawing showing most of the changes you had mentioned. I did slim down the area above the cluster. You had suggested lifting the top line 3/8" at the cluster end but I thought that it looked too thick when I did that. I used a 1200" radius to finish at 1/4" below the original height at the "glove box" end. I pretty much have all of the programming done to cut the whole top of the dash out of wood. I have cut the front section out based on the new design and I think it looks pretty good! Will post pics when I have a little more.
Thanks again!
BTW I do have about a 36" radius on the top from front to back also.

Steve........sorry it took a while to get back.....those changes take it to another level! You will like the way that light reflects off the curves when it's all done.
There's a lot of man-hours in that dash.....WE ARE ALL IMPRESSED.
F
Jim.

[71RS/SS396]

Originally Posted by slenning

A little more progress. I started off with this for a door bar setup,
[IMG][/IMG]
then last weekend I decided to change it to this.



Cut these out on waterjet
[IMG][/IMG]
to mount Peterson oil tank
[IMG][/IMG]

What's the capacity of that tank?
Are you using the GM dry sump?

[slenning]

Originally Posted by waynieZ

I love that gauge set up! The dash is going to be sweet!

Thanks Wayne! Your Camaro is going to be killer! Can't wait to see it done.

[slenning]

Originally Posted by Sheck44

Steve ... wow

Thanks a lot Steve. Absolutely love your 69!!

[slenning]

Originally Posted by 71RS/SS396

What's the capacity of that tank?
Are you using the GM dry sump?

Hi Tim 8 quart tank and yes on the GM dry sump
Same setup as my 69 and have been very happy with that.

[slenning]

Originally Posted by syborg tt

Cough...Cough

I think we need an update.

LOL Right you are Marty!! Coming up

[slenning]

Made brackets to mount the ecu and the pedal. The waterjet in the next room comes in handy!
[/IMG]
[/IMG]
[/IMG]
[/IMG]

[/IMG]
Oops that last one is a little fuzzy!
Also making a panel to mount all of the Dakota Digital and Ikey stuff. These are the brackets we made to mount the panel to the cage cross bar [/IMG]

[slenning]

I posted a pic of this on another thread yesterday but figure I should post it on here also.
[/IMG]
Dakota Digital made this controller up custom for me to match the VHX-1100 I'm using in my dash. It's the first controller they've made with the black bezel and the carbon fiber face. Their shop is just a couple of miles from mine. Their shop is incredible and a great bunch of guys!!