...

Go Back   Lateral-g Forums > Technical Discussions > Race Cars and Modern Pro-Street
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-28-2011, 09:55 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default Budget '69 Camaro Track Car - NO WHINERS!

A few of you have been asking about my car so I thought since I have a little time I would share the story of how my car got started.

Back in the year 2000 I picked up A PHR magazine showing the process of the building of Stielow's and now Charlies "the Mule". By this time I'd already had my car for 5 years.

I threw on upper Global West control arms and rear leaf's, a Baer brake track/touring set up, Speed Direct rack, and some 17" Torque Thrust II's with 255's on 8's up front and some 275's on 9.5's in the rear.

Here's a couple of old pic's from back the day. Hang tight as I'm digging up photos and resizing them


__________________
Gaetano Cosentino

Last edited by Track Junky; 10-29-2011 at 09:33 PM.
Reply With Quote
  #2  
Old 10-28-2011, 10:03 PM
Flash68's Avatar
Flash68 Flash68 is offline
Moderator
 
Join Date: Sep 2005
Location: NorCal
Posts: 9,180
Thanks: 58
Thanked 158 Times in 104 Posts
Default

Hey, about time you post a thread! But no pic attached buddy.
__________________
2004 NASA AIX Mustang LS2 #14
1964 Lincoln Continental
2014 4 tap Keezer
Reply With Quote
  #3  
Old 10-28-2011, 10:46 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

I ran NASA HPDE's up until 2004 or 2005 and then they started the Time Trial group.

Here's a couple of pic's running Time Trials in 2006. By this time the roll cage, DSE subframe connectors, and new 383 with 500 hp was in.

2006 would be my last year racing the car as other priorities would take place.



__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:03 PM.
Reply With Quote
  #4  
Old 10-28-2011, 11:08 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

Fast Forward to 2010. I'm off work for 3 months due to surgeries. I've known about the Pro-Touring forum since 2002 but never really participated but with 3 months of nothing to do where else could I have possibly ended up.

So with all the killer builds going on Phase 2 began. I started with ordering an aluminum small block 427 motor from NYES. Keep in mind this is a budget build and the only way to get big horse power and torque on a budget is high compression. This motor is 13.5 compression and makes 620 hp at 6500 rpm and 550 torque at 5000 rpm.





__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:17 PM.
Reply With Quote
  #5  
Old 10-28-2011, 11:22 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

Of course I couldn't stop there. I got word that AMD was making aluminum front clips for the '69's so I decided to throw one on.

So off with the front clip.


__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:26 PM.
Reply With Quote
  #6  
Old 10-28-2011, 11:27 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

And on with the new aluminum one.


__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:31 PM.
Reply With Quote
  #7  
Old 10-28-2011, 11:29 PM
intocarss's Avatar
intocarss intocarss is offline
Senior Member
 
Join Date: Aug 2011
Location: So Cal in the Sfv
Posts: 4,257
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Good stuff...keep it coming
__________________
If it ain't buckin, chirpin & makin all kinds of bad noises, then I ain't happy

Accelerating is optional...........stopping is mandatory. Your car WILL stop one way or another.
Reply With Quote
  #8  
Old 10-28-2011, 11:32 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

Thanks Jerry!!
__________________
Gaetano Cosentino
Reply With Quote
  #9  
Old 10-28-2011, 11:37 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

So next thing to do obviously would be to paint the car. Being budget minded I tell the painter to just paint the front and match the rear. When I went to pick the car up the paint matching didn't go so well. As a matter of fact it wasn't even close. The front looked awesome and the rear looked as dull as a faded hugger orange could possibly look so we ended up painting the whole car.


__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:44 PM.
Reply With Quote
  #10  
Old 10-28-2011, 11:46 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

Motor is in and car is painted. Time for some exhaust. I went wth 3" all the way out the back.






__________________
Gaetano Cosentino

Last edited by Track Junky; 10-28-2011 at 11:52 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net