...

Go Back   Lateral-g Forums > Technical Discussions > EFI and Forced Induction
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-2012, 09:24 PM
morris69 morris69 is offline
Senior Member
 
Join Date: Nov 2005
Posts: 152
Thanks: 1
Thanked 2 Times in 1 Post
Default ls9

Is anyone running a ls9? What are the pros and cons. If any
Reply With Quote
  #2  
Old 04-02-2012, 10:55 PM
Firebirdsteve's Avatar
Firebirdsteve Firebirdsteve is offline
Senior Member
 
Join Date: Sep 2011
Location: Maple Ridge, BC Canada
Posts: 204
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Pros: It's a total beast!
Cons: It's frickin $20,000
Reply With Quote
  #3  
Old 04-02-2012, 10:58 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,897
Thanks: 5,509
Thanked 1,589 Times in 712 Posts
Default

Quote:
Originally Posted by morris69 View Post
Is anyone running a ls9? What are the pros and cons. If any
Cool setup. Cons are cost, and the fuel system needed to run it. It does not use a standard 58 psi LS setup, think it's close to 100 psi under boost with a specific pump controller and pump setup.

You may be able to run it with an aftermarket ECU and aftermarket injectors and pump/regulator; I have not researched that. But the factory fuel system is very expensive.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #4  
Old 04-03-2012, 11:55 AM
hifi875's Avatar
hifi875 hifi875 is offline
Senior Member
 
Join Date: Aug 2005
Location: bowling green ky
Posts: 816
Thanks: 0
Thanked 0 Times in 0 Posts
Default

the only con is cost. my father in-law had one in a 67 chevyII w/t56 magnum and it was a beast. started out with a 6l90 tranny but had ecu issues that caused it to do some weird stuff. If you can afford one, get one. they also make a statement when you pop the hood. alot more so than a ls w a aftermarket supercharger, even though they run as strong. just my .02
Reply With Quote
  #5  
Old 04-23-2012, 03:56 PM
mikels mikels is offline
Senior Member
 
Join Date: Apr 2006
Posts: 145
Thanks: 1
Thanked 34 Times in 9 Posts
Default

Quote:
Originally Posted by camcojb View Post
Cool setup. Cons are cost, and the fuel system needed to run it. It does not use a standard 58 psi LS setup, think it's close to 100 psi under boost with a specific pump controller and pump setup.

You may be able to run it with an aftermarket ECU and aftermarket injectors and pump/regulator; I have not researched that. But the factory fuel system is very expensive.
You can run an LS9 with conventional fixed fuel presssure but will need larger injectors (production injectors are not large enough without 600 kPa fuel pressure that FSCM (Fuel System Control Module) commands when under higher load).

LS9 production fuel system is expensive, but very trick and works very well (3-phase DC fuel pump with variable pressure delivery based on ECM requested pressure). Fuel delivery for any high bandwidth engine will always be difficult (and expensive) to do correctly.

Can run with E67 production controller as well with fixed pressure.

Last edited by mikels; 04-23-2012 at 03:58 PM.
Reply With Quote
  #6  
Old 04-23-2012, 06:57 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,897
Thanks: 5,509
Thanked 1,589 Times in 712 Posts
Default

Quote:
Originally Posted by mikels View Post
You can run an LS9 with conventional fixed fuel presssure but will need larger injectors (production injectors are not large enough without 600 kPa fuel pressure that FSCM (Fuel System Control Module) commands when under higher load).

LS9 production fuel system is expensive, but very trick and works very well (3-phase DC fuel pump with variable pressure delivery based on ECM requested pressure). Fuel delivery for any high bandwidth engine will always be difficult (and expensive) to do correctly.

Can run with E67 production controller as well with fixed pressure.
thanks for the info Dave! For those that don't know, Dave knows more about the LS9 tuning than anyone I know of, so if he says it can be done, it can.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #7  
Old 04-25-2012, 08:06 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,506
Thanks: 29
Thanked 2,206 Times in 598 Posts
Default

Quote:
Originally Posted by mikels View Post
You can run an LS9 with conventional fixed fuel presssure but will need larger injectors (production injectors are not large enough without 600 kPa fuel pressure that FSCM (Fuel System Control Module) commands when under higher load).

LS9 production fuel system is expensive, but very trick and works very well (3-phase DC fuel pump with variable pressure delivery based on ECM requested pressure). Fuel delivery for any high bandwidth engine will always be difficult (and expensive) to do correctly.

Can run with E67 production controller as well with fixed pressure.
We set up Red Devil with larger flow injectors and it works great!

Stielow
Reply With Quote
  #8  
Old 04-25-2012, 09:19 AM
clill's Avatar
clill clill is offline
Moderator
 
Join Date: Jul 2004
Posts: 3,554
Thanks: 55
Thanked 1,682 Times in 596 Posts
Default

The LS9 is expensive but it is the best engine I have owned. Smooth trouble free power. First old car I have had that I don't need to look at the gauges. It just runs.
Attached Images
   
Reply With Quote
  #9  
Old 04-25-2012, 09:20 AM
clill's Avatar
clill clill is offline
Moderator
 
Join Date: Jul 2004
Posts: 3,554
Thanks: 55
Thanked 1,682 Times in 596 Posts
Default

And in the above pic where Stielow is drifting, I would be doing a doughnut.
Reply With Quote
  #10  
Old 04-25-2012, 10:24 AM
morris69 morris69 is offline
Senior Member
 
Join Date: Nov 2005
Posts: 152
Thanks: 1
Thanked 2 Times in 1 Post
Default

@clill is that with nods and what tranny and gears are u running.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net