67 Camaro Build - Lateral-g Forums

Blackdog76 · #1 06-21-2021, 08:27 AM

Hey. Ryan in the Bay Area California. I picked up a 67 Camaro freshly media blasted and epoxy primered. All the sheet metal looks really good with the exception of the driver quarter panel and trunk area. I have reproduction steel for those areas and will be doing that along with a mini tub kit since the car is all apart anyway.

Going with an L86 8L90. I did a test fit with the drivetrain and everything fits great, so onward with the sheet metal.

Blackdog76 · #2 06-21-2021, 09:08 AM

Progress

Blackdog76 · #3 06-21-2021, 10:00 AM

Drivetrain

572Camaro · #4 06-21-2021, 10:59 AM

Welcome to Lat-G.
Love your project
Body looks very clean
What are you thinking for color and wheel selection?
Thanks for sharing

**will69camaro** · #5 06-21-2021, 11:45 AM

The 8L90e fit the tunnel with no mods? Do you know what the driveline angle is? I would thin with factory frame, engine sits high, and the tunnel being factory / 8l90e being big, it'd have to be down a bit.

Looks like an excellent start to this project and looking forward to updates

Blackdog76 · #6 06-21-2021, 05:41 PM

Quote:

Originally Posted by 572Camaro

Welcome to Lat-G.
Love your project
Body looks very clean
What are you thinking for color and wheel selection?
Thanks for sharing

I have 15” rally’s for it. Trying to keep a somewhat stock appearance from the outside. Haven’t decided on color.

Blackdog76 · #7 06-21-2021, 05:47 PM

Quote:

Originally Posted by will69camaro

The 8L90e fit the tunnel with no mods? Do you know what the driveline angle is? I would thin with factory frame, engine sits high, and the tunnel being factory / 8l90e being big, it'd have to be down a bit.

Looks like an excellent start to this project and looking forward to updates

Angle seems ok when comparing it to the subframe. The motor does sit a little high but when I tried to drop it down with the 69 Camaro/Nova engine stands it wouldn’t line up. The trans fits the tunnel I think due to the engine being 1.75” forward from the stock engine to trans area.

**214Chevy** · #8 06-29-2021, 09:38 PM

Looks like you're off to a great start.

Blackdog76 · #9 07-04-2021, 09:52 AM

Since my motor is a 2015 and the L83 L86 harness is pretty much identical, I used the L83 LT1swap.com guide to modify my harness myself. Great guide with lots of pictures. It took about an entire day but saved me around $600. I used a current performance ls fuse block which ran around $150.

Blackdog76 · #10 05-10-2022, 02:57 AM

Lots of stuff done