...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2008, 09:31 PM
70Firbird 70Firbird is offline
Member
 
Join Date: May 2008
Location: Los Angeles
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1970 Firebird suggestions

Hello everyone,

I'm new to this forum and have recently just started working on a 70 bird. I've done some searching and have come across some good pieces of advice. However, I'm not sure if all this will work together so I'm posting to get some suggestions.

I have not decided on what motor setup I will be going with yet, but most definitely it will be a big block pushing over 600 hp atleast. With that said, I wanted to beef up the suspension/chassis/brakes first. This is NOT going to be a straight line car. I would like a setup that can deal with the car being driven daily but at the same time suspension that will give me performance when I decide to get on it. Any advice would be appreciated.
Reply With Quote
  #2  
Old 05-04-2008, 09:52 PM
bigtyme1's Avatar
bigtyme1 bigtyme1 is offline
Senior Member
 
Join Date: Aug 2006
Location: Stewartstown PA
Posts: 1,777
Thanks: 0
Thanked 3 Times in 3 Posts
Default

welcome aboard, There's plenty of pontiac info on here just look around. You might want to look for Frank from prodigy customs. he can hook you up with most of you suspension parts. I have a 454 if your interested.

http://www.prodigycustoms.com/
__________________
69 RS Ragtop
[email protected]
Will trade wife for parts!!!
Reply With Quote
  #3  
Old 05-05-2008, 12:09 AM
NOT A TA's Avatar
NOT A TA NOT A TA is offline
Senior Member
 
Join Date: Mar 2007
Location: South Florida
Posts: 671
Thanks: 6
Thanked 25 Times in 23 Posts
Default

First of all WELCOME! Got pics? Nice to see another 70 getting the treatment. Also glad to hear it'll be driven! There's lots of info here if you use the search function in each section to look up topics you're thinking about.

It'd be easy to just say build it like I did mine and list out the mods I did and parts I used, but that might not be the best thing for your intended usage and budget. We're here to help you spend ALL of your disposable income!

Your request was kinda vague. Answers could range from better shocks and semi metallic pads to replacing your frame with a full frame and complete suspension, brakes and wheel/tire combos depending on your budget.

If you are a little more specific about the usage the car might see like track time (autocross, dragstrip,road course, top speed etc) and what kind of street driving (# of passengers, payload,types of roads etc) and a ballpark budget you'll probably get a bunch of very good suggestions.
__________________
John Paige

70 Firebird Esprit, 400 TA clone type "The 14 car"
lab-14.com
Reply With Quote
  #4  
Old 05-05-2008, 12:14 AM
NOT A TA's Avatar
NOT A TA NOT A TA is offline
Senior Member
 
Join Date: Mar 2007
Location: South Florida
Posts: 671
Thanks: 6
Thanked 25 Times in 23 Posts
Default

Forgot I don't have a sig pic here so here's mine.

__________________
John Paige

70 Firebird Esprit, 400 TA clone type "The 14 car"
lab-14.com
Reply With Quote
  #5  
Old 05-05-2008, 02:12 AM
70Firbird 70Firbird is offline
Member
 
Join Date: May 2008
Location: Los Angeles
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Default

For the more competitive aspect, I'd like it to be set up more along the lines of roadcourse style racing while still being able to hold it's own on the drag strip. I'm not looking for a crazy prostreet set up, but I would still like to be able to pull in good numbers in all good fun. As far as daily driving, it would typically be 1-2 people in the car, occassionally 4, but I wouldn't really be pushing the car with that many people. Typical highway/city driving, occassional traffic. No dirt road type driving. I'd also still like to be able to drive the car on road trips ie. Los Angeles to San Francisco or Vegas etc.

Bigtyme1: Thanks for that link i'll be checking it out over the next few days.

NOT A TA: That is a very nice bird you've got. That's actually what I had in mind for mine. I know someone with an old TA sitting around under a heap of junk. I'm going to try and ask if I can buy his TA fenders and air dams off of him.
Reply With Quote
  #6  
Old 05-05-2008, 02:15 AM
70Firbird 70Firbird is offline
Member
 
Join Date: May 2008
Location: Los Angeles
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I picked her up last week looking like this:



Reply With Quote
  #7  
Old 05-05-2008, 02:16 AM
70Firbird 70Firbird is offline
Member
 
Join Date: May 2008
Location: Los Angeles
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Default

After long hours under the sun, I did the best I could temporarily:


Reply With Quote
  #8  
Old 05-05-2008, 12:35 PM
sledge33 sledge33 is offline
Member
 
Join Date: Nov 2005
Posts: 82
Thanks: 0
Thanked 0 Times in 0 Posts
Default

hello,I also have a 71 bird i have been working on.just put in a 455 from another firebird i bought a while back.Frank at prodigy got me the g-bar and mini tubs from dse.20x10 with a 315 rear tire and it sits low.its stripped down ready to go to paint.i hope to be able to drive it some this summer but you know how paint shops are.
call frank at prodigy he has always treated me right and got me just what i needed.
Reply With Quote
  #9  
Old 05-05-2008, 02:20 PM
70Firbird 70Firbird is offline
Member
 
Join Date: May 2008
Location: Los Angeles
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks sledge33, will do, Frank sounds like a very helpful guy from the responses I have been getting.
Reply With Quote
  #10  
Old 05-06-2008, 01:21 AM
NOT A TA's Avatar
NOT A TA NOT A TA is offline
Senior Member
 
Join Date: Mar 2007
Location: South Florida
Posts: 671
Thanks: 6
Thanked 25 Times in 23 Posts
Default

Looks like a pretty good car you've got to start with there. Are the wheels on it original 70 rims? If you're not sure get the codes off of them (by the valve stem I think)and post them up here. Someone will tell you if they're the highly sought after rims. If they are you could Ebay them and probably get enough from someone restoring an original 70 TA to buy a nice set of new wheels.

Mine was an Esprit, I added all the TA body parts. At least you got a rear spoiler a cool hood and some wheels! All I got was 3 dog dish hubcaps!

Sounds like a suspension setup something like mine for would be fine for you. Stock subframe with aftermarket springs, sways, shocks, bushings, connectors etc. If you lower it but don't mini tub it be carefull how wide you go with the rear tires since there might be 4 adults a full tank and a spare.

I got my MOMO wheel from Frank (too bad it wasn't straight for this pic)

__________________
John Paige

70 Firebird Esprit, 400 TA clone type "The 14 car"
lab-14.com
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net