...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2016, 04:06 PM
JTC68Camaro JTC68Camaro is offline
Junior Member
 
Join Date: Mar 2016
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default McLeod Racing Muscle Car 5 vs Tremec TKO600

Newbie here with my first post, currently in the middle of a complete frame off resto on my 68 Camaro, currently trying to decide on the manual tranny to put in. Will be mated to a small block 350 putting out about 450+HP...wanted to know if anyone has had any experience with the McLeod tranny vs. the Tremec TKO600 and to get some feedback (pros / cons).

Car will be used for weekend cruising and some back roads hot rodding...not a race car.

Any feedback will be appreciated.

Thanks,
Reply With Quote
  #2  
Old 03-06-2016, 11:48 PM
TheJDMan's Avatar
TheJDMan TheJDMan is offline
Senior Member
 
Join Date: Jan 2011
Location: Northern Virginia
Posts: 690
Thanks: 5
Thanked 25 Times in 13 Posts
Default

Personally, I would go with a T56 Magnum 6 speed.

BTW, Welcome to Lat-G.
__________________
Steve Hayes
"Dust Off"
68 Camaro
Speed has never killed anyone. Suddenly becoming stationary, that's what gets you!
"Jeremy Clarkson"
Reply With Quote
  #3  
Old 03-07-2016, 12:39 AM
JTC68Camaro JTC68Camaro is offline
Junior Member
 
Join Date: Mar 2016
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks...was considering a 6 speed, possibly a rebuild but wasn't sure if that opened a can of expensive worms with new bellhousings, flywheels and hydraulic clutches...my head is spinning.
Reply With Quote
  #4  
Old 03-15-2016, 11:22 PM
Yenko68 Yenko68 is offline
Member
 
Join Date: Sep 2008
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Id call around to like Hurst Driveline and tell them you intentions for your ride?. The T56 is the ultimate but more modifications and money. Everyone has their opinion but justbe real and research. Good luck
Reply With Quote
  #5  
Old 03-16-2016, 12:51 AM
rustomatic rustomatic is offline
Senior Member
 
Join Date: Apr 2014
Location: ATL
Posts: 748
Thanks: 11
Thanked 58 Times in 36 Posts
Default

The T56 is obviously awesome, but the others have benefits. I can't speak for the McLeod, but the TKO is lighter and smaller than the T56, withstands similar torque outputs, and really, one overdrive (vs. two) is enough for most people. It's also cheaper . . .
Reply With Quote
  #6  
Old 03-16-2016, 11:44 AM
NOPANTS68 NOPANTS68 is offline
Senior Member
 
Join Date: Sep 2007
Location: Orangevale CA
Posts: 916
Thanks: 2
Thanked 22 Times in 20 Posts
Default

Between the T56 and the TKO600, I'd go TKO600. It's smaller and more useable than the T56 IMO. I used a T56 in my '68 Nova and had to remove most if not all of the trans tunnel and some of the driveshaft tunnel. I had 28" tires and 4.33s and found 6th to totally useless. Car had a monster cam in it so it didn't like being under 1500 rpm on the freeway. The last car I did had a Richmond 5 speed in it which I found to be better than my TKO and the T56. It shifted better, zero tunnel mods in a '67 Chevelle, and was capable of plenty of power shifting abuse.

I looked closely at the McLeod at SEMA last year and really liked what they had done. It's effectively an internal rail Richmond, but with a much more updated case and design. Like the Richmond, it won't require any tunnel mods in an early car which is bitchin IMO. The only drawback is that it's only rated at 500HP and 500 torks. depending on how much animal you have up front, it might be the best choice of all.
__________________
1929 Roadster Pickup
1961 Chevy Parkwood Wagon
1956 Chevy 210


Smithcraft Collision and Restoration
Newcastle , CA
Reply With Quote
  #7  
Old 03-16-2016, 07:11 PM
Vegas69's Avatar
Vegas69 Vegas69 is offline
Senior Member
 
Join Date: Dec 2006
Posts: 8,692
Thanks: 86
Thanked 214 Times in 120 Posts
Default

I wouldn't put a tko 600 in a tractor. I'm sure I just had a dud and pushed it way beyond it's limits in my car, but I hated it.
__________________
Todd
Reply With Quote
  #8  
Old 03-16-2016, 07:16 PM
ironworks's Avatar
ironworks ironworks is offline
Senior Member
 
Join Date: Oct 2005
Location: Bakersfield, Ca
Posts: 5,155
Thanks: 4
Thanked 30 Times in 19 Posts
Default

The TKO600 shifts like a tractor also. If I can do it I talk the customer out of them if you actually want to shift them.

We have a Mcloud trans on a current project but have not driven it yet.
__________________
www.ironworksspeedandkustom.com
Reply With Quote
  #9  
Old 03-17-2016, 01:02 AM
preston preston is offline
Senior Member
 
Join Date: Nov 2005
Posts: 653
Thanks: 0
Thanked 30 Times in 17 Posts
Default

Interesting - my TKO shifted great, better than my T56.

But I also broke 3rd gear in it (albeit behind a 427TT). Haven't broken the t56 yet, but it hasn't seen the same duty cycle yet either.
Reply With Quote
  #10  
Old 03-21-2016, 11:50 AM
bret's Avatar
bret bret is offline
Supporting Vendor
 
Join Date: Jul 2006
Posts: 483
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Whats better than a tko?

Anything.

T56 is not great, but the best tremec offers at this point. It needs a very light clutch to shift at high rpm and require extensive tunnel surgury to fit in a musclecar.

No experience with the mcLeod.
__________________
Bret Voelkel
President
RideTech
Air Ride Technologies, Inc.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net