Race Mesh Grill Material - Bulk?

[Dennis26]

I'm interested in obtaining "Race Mesh" grill material to make custom grills for my 1973 Trans Am. I've done some searching in the internet but have only found grills to fit specific cars, not my car. Anyone have a source for this?

Thanks!

[zbugger]

Allstar Performance part number ALL22267 is stainless wire mesh at 1/8". That's the part number for a sheet at 36" x 36". They also carry 5/64" mesh and 3/16" mesh. You can get it from Lane Automotive, or anywhere else that carries the Allstar Performance brand. They also have different size sheets. You could check their online catalog at www.allstarperformance.com for more info.

[ANVIL1]

Dennis,

We have some aluminum expanded metal and hex stamped sheet in different sizes if that would interest you. I might be able to get a hold of some stainless mesh too. Call us at out toll free number 888 723-8882. I'm working with a friend of mine who owns Grillecraft to make some grilles for Camaros. I would be interested in making stainless mesh grilles for Firebirds too.

[fesler]

Matt we need to talk in the morning we are working on this as well.

[elitecustombody]

http://www.mcmaster.com/

theese guys have just about anything you need for fabrication or whatever else,usually I get my stuff next morning even if I order after 4pm

[redfire69]

here's the honeycomb mesh grill material Year One uses on the Bandit car: http://www.mcnichols.com/products/perforated/ They also have square, slotted, etc.

Ron