brake confusion. - Lateral-g Forums

67_camaroRS · #1 07-12-2015, 09:00 PM

i see people with corvette brakes on their 1 generation camaros. how do they do it? do they need special brackets? i have a 67 camaro and im currently looking for some brakes and those corvette brakes have caught my eye. thanks.

**will69camaro** · #2 07-12-2015, 11:52 PM

Click the "Kore3" banner in the sponsor list. Tobin can help you out with setting the car up!

William

RLJ676 · #3 07-13-2015, 07:49 AM

The Kore3 hub /brackets are really nice looking, and you can also use aftermarket spindles that mount vette brakes and hubs but fit your car. CPP makes some as well as ATS I believe (the ATS ones are really nice but $$$ and may only come with aftermarket subframes).

**Vega$69** · #4 07-13-2015, 02:46 PM

The fronts are easy it's the rear with the E break that needs the custom brackets

Decline · #5 07-13-2015, 04:25 PM

+1 on kore 3. Tobin really knows his stuff and can help with the overall braking system set up.

If you know what your doing and/or more adventurous flynbye makes brackets that adapt the Gen5 camaro brembos to 1st gens. Those can be found for considerably less $ than Z06 brakes.
Ive never heard of anyone actually doing this hence the adventure part
http://flynbye.com/catalog/c5_p1.html

I have C6 spindles on my Art morrison subframe so I used Wilwoods Z51 aerolite kit on aftermarket(DBA 5000s) Z51 rotors as my low cost 6 piston option (bought from Kore3)
http://www.wilwood.com/BrakeKits/Bra...emno=140-12629