XV Stainless Headers

[dqhemi]

We've just got the first production batches of our stainless headers in. I'm really pleased with how these turned out. We're doing matching 3" stainless exhaust with polished stainless mufflers a well. I'll have pics of that installed in a week or two.

Here's the details and some pics:

Ready to make serious horsepower these long tube, equal length headers in beautiful 409 Stainless Steel are an XV Motorsports exclusive.

These are the only headers on the market designed to work with cars that DON'T have torsion bars and run a front mounted rack (and take full advantage of all that extra space!). The headers were designed to work with XV's Level II suspension K-Member and will likely work with other aftermarket K-Members that eliminate the torsion bars (call for details). These will not fit on cars with torsion bars.

We've designed some great features into our headers that were pretty important to us for our builds and we're sure others will appreciate as well.

All of our headers feature an O2 sensor bung, so if you're running EFI these are ready to go. These are also great if you're running a carb and want to check your air fuel ratio. Just bring the car to a chassis dyno and you'll be able to perfectly dial in your carb(s)!

We also had them made with production style ball and socket type connection at the collectors. This type of connection allows much easier and flexible installation and does not require any gaskets.

Our headers were made so that you don't need to remove the headers to replace your starter. This was able to be done since these headers were designed for cars that DON'T run torsion bars.

We are offering these for the 6.1 HEMI, 5.7 HEMI, 426 HEMI and 440/Big Block motors.

These can also be ordered ceramic coated for an additional charge.







Hope you all like. There's some more details and pricing on our website.
One more reason to make your next build a Mopar.....

We'll be annoucing another new product hopefully later today or tomorrow.