...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2022, 07:52 AM
Redduck Redduck is offline
Junior Member
 
Join Date: May 2009
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Chris Alston Subframe and Front Wheel Size

Are any of you running a Chris Alston g-machine subframe on a 69 Camaro? I am trying to finish up a car with this subframe and I need to know what wheel size would work with it. I had a local shop do measurements and they are saying a 18"x7" wheel is all that will work up front.

Any of you have direct experience with this combo and willing to share your wheel dimensions?
Reply With Quote
  #2  
Old 05-31-2022, 01:40 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,898
Thanks: 5,519
Thanked 1,589 Times in 712 Posts
Default

Have you contacted them directly? I'm positive it can take a wider wheel than that. Just found this:

http://www.cachassisworks.com/attach...701_ds_web.pdf

Camaro/Firebird 1969 - 11-11.6” tire section width (275 = 10.8”, *285 = 11.2”,*295 = 11.6”)
Typical sizes include: 275/45-16, 275/40-17, 275/35-18, 275/30-19, and 275/25-20. *285 & 295 series tire
can be used with a carefully selected wheel backspace that centers the tire in the allowable space.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #3  
Old 05-31-2022, 02:37 PM
Redduck Redduck is offline
Junior Member
 
Join Date: May 2009
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thank you. I have contacted them directly, and unfortunately all they would tell me is that I would need to take measurements to get exact wheel sizes. In case it helps, here are the measurements I have:
Front Spacing: 3"
Back Spacing: 10.5"
Reply With Quote
  #4  
Old 05-31-2022, 03:22 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,898
Thanks: 5,519
Thanked 1,589 Times in 712 Posts
Default

Quote:
Originally Posted by Redduck View Post
Thank you. I have contacted them directly, and unfortunately all they would tell me is that I would need to take measurements to get exact wheel sizes. In case it helps, here are the measurements I have:
Front Spacing: 3"
Back Spacing: 10.5"
I don't know what those measurements are. For a 275/35 or 40 or similar most guys run a 8" wheel with 5.25" bs. I'm sure you can run a 9 to 9.5" wheel up front.

These guys have a 67 on their FB page with the Chassisworks g machine subframe.

https://www.facebook.com/ProTouringG...14551622100952
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #5  
Old 06-01-2022, 03:52 PM
Redduck Redduck is offline
Junior Member
 
Join Date: May 2009
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thank you! I really appreciate the help!
Reply With Quote
  #6  
Old 06-01-2022, 06:07 PM
dhutton dhutton is offline
Senior Member
 
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,892
Thanks: 1,101
Thanked 484 Times in 267 Posts
Default

Quote:
Originally Posted by Redduck View Post
Thank you. I have contacted them directly, and unfortunately all they would tell me is that I would need to take measurements to get exact wheel sizes. In case it helps, here are the measurements I have:
Front Spacing: 3"
Back Spacing: 10.5"
Those numbers don’t make any sense to me. They imply a 12.5 inch wide wheel.

For stock WMS on a first gen the offset is +6mm regardless of wheel width to center wheel in the wheel tub.

Don

Last edited by dhutton; 06-01-2022 at 06:10 PM.
Reply With Quote
The Following User Says Thank You to dhutton For This Useful Post:
camcojb (06-01-2022)
  #7  
Old 06-30-2022, 11:29 AM
Steve68 Steve68 is offline
Lateral-g Supporting Member
 
Join Date: Apr 2005
Location: orlando fl
Posts: 957
Thanks: 45
Thanked 34 Times in 26 Posts
Default

I under stood a 10" wheel with a 305 tire would work, with larger wheels wells of course,

but it could be hearsay!
__________________
68 SS Camaro LSX/T56 in work, SMD subframe, , DSE Mini tubs, Fikse Profil 13's, Alston G Link, and other parts!! ,

70 Nova SS street racer, ugly,
Reply With Quote
  #8  
Old 07-02-2022, 11:38 AM
joeko23 joeko23 is offline
Member
 
Join Date: Oct 2011
Posts: 62
Thanks: 0
Thanked 28 Times in 21 Posts
Default

I have their frame on my 69 Camaro. I have 275/35/18 tires with 9.5 wheel with 15mm offset which equates to about 5.75” offset. The only issue I have is the tire rubs the frame at lock to lock. I put a 1/4” spacer and it still rubbed the frame slightly so I had to put rack and pinion spacers to limit travel. I put 1 spacer on each side now no rubbing.

So with the 1/4” spacer my offset is 5.5” or 10mm. So I think your safe with 5.5”-5.75” of offset. You will definitely need the rack spacers. BTW, I have stock inner fender bolts and the tires do not rub on the bolts.

Here’s a link to the spacers.

1979-2004 Mustang Steering Rack Limiter Stop Spacers - 6pc https://a.co/d/gYb5BLz
__________________
My Very Ambitious 69 Camaro Build
https://www.pro-touring.com/threads/...d-0-Fab-Skills

Last edited by joeko23; 07-02-2022 at 11:47 AM.
Reply With Quote
The Following User Says Thank You to joeko23 For This Useful Post:
camcojb (07-02-2022)
  #9  
Old 08-02-2023, 11:38 PM
Y-TRY Y-TRY is offline
Senior Member
 
Join Date: Jan 2005
Location: Frisco, Texas
Posts: 291
Thanks: 1
Thanked 0 Times in 0 Posts
Default

I realize this is an old post but it’s perfect timing that I came across it.

I have the Alston front frame in my ‘68. As I’m looking into sizing my wheels I notice that their manual states, in bold, not to use positive offset wheels with this suspension. I don’t know if it’s the geometry or spindles or what. But that kinda limits the wheel choices. None of the sizes mentioned earlier would work without positive offset.

Do you guys know why this is? Is there something that can be changed?

Also, I have their sculpted spindles and really don’t like how the dust cap sticks out of the wheel and I can’t use center caps. Are there any other spindles appropriate for this kit that might have a shorter shaft or something? I’ve got Baer’s hubs and the wheels otherwise fit fine and mount flush to the rotor. It’s just ugly and I’ll have to grind out the little lip that the caps would clip to so that I can screw the dust covers on.
Reply With Quote
  #10  
Old 08-05-2023, 08:26 AM
joeko23 joeko23 is offline
Member
 
Join Date: Oct 2011
Posts: 62
Thanks: 0
Thanked 28 Times in 21 Posts
Default

That’s why I had to use the 1/4” spacer in the fronts because the hub sticks out and I couldn’t get the center cap to clip in. With the 1/4” spacer everything fits. As far as the offset I’m not sure but I know 67-68 Camaros have less room than 69 Camaros. The offset/backspace I have isn’t a lot from center. Mine is 15mm which is about .6” and I added a 1/4” spacer so now we are talking about .3” from center?
__________________
My Very Ambitious 69 Camaro Build
https://www.pro-touring.com/threads/...d-0-Fab-Skills
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net