1970 Plymouth Barracuda Grand Coupe project w/ Speedkore Carbon Fiber Clip, bumpers, engine bay

[Bowtiguy]

<<<<<<<<<<SOLD>>>>>>>>>>


Item Location (City/State):Loveland, CO

Price:27500

Description:1970 Barracuda Grand Coupe Project with complete SPEEDKORE Carbon Fiber Front clip/bumpers & Ring Brothers Billet hood hinges – pin kit.

The Car: Original FK5 deep burnt orange metallic paint over burnt orange interior, 318 A/C car with its original paint.... so no hidden issues under old body work ( you can see the exact condition of the metal).

The Good
-Matching numbers body (shell, cowl, radiator support).
-Clear Colorado title in my name ( no salvage or rebuild)
-Complete Car (minus drive line & suspension).
-Original A/C car with correct dash
-All glass/actuators included
-Near mint hood
-Complete burnt orange interior (w/ bucket seats, grand coupe overhead consule & A/C dash)
-Complete stainless trim including grand coupe badges
-AMD door skins and hinges have been installed
-AMD front inner fenders & aftermarket supports have been installed.


The Bad
-Lower portion of the rear quarters and outer wheel wells need replacing ( new AMD metal included).
-Small area of rust on driver floor board, does not effect subframe.
-Rear trunk pan / trunk pan extensions will need replacing
-Small area of rust on passenger-rear frame rail, can be repaired w/o replacement.
-Windshield will need replacing

Condition: VERY SOLID main floor/rockers/frame Rails. No rust on the roof (vinyl top removed in the 80's). No rot around the windows or cowl. Doors have been re-skinned with AMD metal.
*******car is mounted on US CAR TOOL 8" ball bearing casters for easy trailer loading. I can source/install a basic suspension for any international buyers.

SPEEDKORE CARBON FIBER PARTS

COMPLETE SPEEDKORE PERFORMANCE 1970 CUDA FRONT CLIP. This entire front clip including engine bay panels, bumpers, side marker housings currently sells for over $28k with shipping & sales tax. ( Pay for the kit and get a free donor car!)

THESE ARE NOT CHEAP PARTS MADE IN CHINA!!! ALL PRE-PREG HAND LAID AD AUTOCLAVED IN GRAFTON WISONSIN...CARBON WEAVE LINES UP ACROSS ALL PANELS.

The same parts that were used in the construction of The Cuda' known as “Menace” owned by Kevin Heart. Unless otherwise indicated, All panels have been clear coated for protection and are still wrapped in the original bubble wrap. No test fits or installations. The full carbon kit includes...

#PLY-CUDA-005 complete hood w/ inserts. ( clear on the top, primed on the lower). has not been drilled for pins.

#PLY-CUDA=008 RIGHT & LEFT fender assemblies w/ headlight buckets & inner supports - (fenders have been primed black up to the hood line).

#PLY-CUDA-007 front hood header panel & supports

#PLY-CUDA-002 front bumper w/ mounting brackets

#PLY-CUDA-003 Lower Valence Panel

#PLY-CUDA-004 Rear Bumper w/ mounting brackets

#PLY-CUDA-006 set of 4 side marker light housings

# Engine bay insert -smooth fire wall, R & L inner fenders, radiator cover ( not even listed on their website)

Shipping is available w/in an 8 hour drive of Denver.

$27,500 for everything. $17,500 for the Speedkore parts alone. I will NOT sell the car separately unless the Speedkore parts sell first.

-=MIke (303) 489-7346

[Bowtiguy]

Ive got plenty of additional pictures. Feel free to ask. -=MIke (303) 489-7346

[232_ray]

Did you ever continue work on this car? or did you sell carbon parts?

[Bowtiguy]

Originally Posted by 232_ray

Did you ever continue work on this car? or did you sell carbon parts?

Car & parts were sold February 2021. I ended up purchasing a 1 of 11 Callaway Aerobody CR1, a bucket list car for me. Im teh end, I could restore/restomod my 1967 and 1970 Corvettes what I would have had into the E body.

Project went to the Reno area and hasnt made any progress last I knew. Although, he does has a Hellephant engine for it.

-=MIke