1965 chevelle lt1 swap

[lt1 chevelle]

this is my first time building a pro-touring car (well helped build my dads 69ss chevelle) the fame is powder coated black 1in rear sway bar 10bolt posi with 3:55's lowered 1.3in all the way around boxed controle arms. front: upper tubuler a arms with 1-1/8 sway bar with all poly bushings. interior: all stock with autometer gagues will put in diff front seats later on. b&m shifter.motor/trans. its a lt1 with a 700r4. the lt1 is all stock inside. i had the intake powder coated blue and i have a 52mm holley t/b for it. it has all msd electrical and dyno max headers and will have a stage 2 fast chip.www.fastchip.com will be reburing the comp and i might do the wireing myself for send it to www.lt1350.com. im not running big rims becuase i can afford them so im just puting 15in torq thurst on. the tranny is form tci.fuel system: iam in the process of puting a sump on my tank i am running the MSD High Pressure Electric Fuel Pump and a Aeromotive A1000-6 Injected Bypass Regulator. for the fuel rails i will be welding in -6 an fitting to them so i can run a firewall mounted fuel pressure regulator and it also looks alot cleaner than the stock way. for the brakes i have wilwood superlights for the front and drumbs for the rear.