When I've ordered my T56s directly from tremec I've ordered them with the connector. It comes loose in the box so unfortunately I don't have a PN for you. Have you tried a Ford or GM dealer? I'm not sure if either/or use the VSS in the trans but that may be a possibility.
Otherwise I would try any of the number of guys selling modded T56s. Break open your favorite car mag and there will be half a dozen in there.
__________________
-Sean
Comp Performance Group
Business Development Manager
I've been ordering all my Delphi plugs from Mouser. If you're able to crimp the pins you can for far cheaper than the places that sell the plug with pigtails.
I've been ordering all my Delphi plugs from Mouser. If you're able to crimp the pins you can for far cheaper than the places that sell the plug with pigtails.
Nope not it, that is the one for the stock GM T56. The Magnum uses a Ford connector.
It looks like:
Sure I can buy this connector pig tail, I have already bought one, i prefer to find the connector body & terminals & crimp them on.
__________________
Scot
86 Monte SS
LS2/T56 Magnum
Nope not it, that is the one for the stock GM T56. The Magnum uses a Ford connector.
It looks like:
Sure I can buy this connector pig tail, I have already bought one, i prefer to find the connector body & terminals & crimp them on.
Check with the Ford guys at the dealer, you can buy or get the pin terminals from them. I had a bunch of random pins just layin around. Since you have a pig tail all you have to do is take it apart. Easy.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Ford T56 VSS connector?
Just swap the sensor for a propper GM version. 
Linear Mode
