...

Go Back   Lateral-g Forums > Technical Discussions > EFI and Forced Induction
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-28-2007, 03:29 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Senior Member
 
Join Date: May 2006
Location: Copenhagen, Denmark
Posts: 1,612
Thanks: 0
Thanked 1 Time in 1 Post
Default boost??

Ok here is the setup... stock 2002 LS1

i dont want to open the engine yet... so please no crank, heads, piston and rod suggestions... i am windering what boost i can safely run on an stock LS1 on 98 octane (ninety-eight) i have a large intercooler

and what power should i expect (buy injectors to feed)
and lastly... will this fit under a g-body hood???
__________________
Elwood:We're 105 miles from Chicago, we have a full tank of gas, half pack of cigarettes, it's dark out and we're wearing sunglasses.
Jake: Hit it.
Reply With Quote
  #2  
Old 10-28-2007, 03:31 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Senior Member
 
Join Date: May 2006
Location: Copenhagen, Denmark
Posts: 1,612
Thanks: 0
Thanked 1 Time in 1 Post
Default

another pic of the height.... i am prety worried about hood clearance..

__________________
Elwood:We're 105 miles from Chicago, we have a full tank of gas, half pack of cigarettes, it's dark out and we're wearing sunglasses.
Jake: Hit it.
Reply With Quote
  #3  
Old 10-28-2007, 03:37 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,206
Thanks: 6,562
Thanked 2,015 Times in 918 Posts
Default

10-12 psi is the most I've seen last assuming no detonation. The octane certainly helps as well as a good efficient intercooler and a proper tune.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #4  
Old 10-28-2007, 04:19 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Senior Member
 
Join Date: May 2006
Location: Copenhagen, Denmark
Posts: 1,612
Thanks: 0
Thanked 1 Time in 1 Post
Default

a stock LS1 makes what 325 Hp, so at 12 pounds that comes out at about 590 Hp with no cats ans A/C correct???
__________________
Elwood:We're 105 miles from Chicago, we have a full tank of gas, half pack of cigarettes, it's dark out and we're wearing sunglasses.
Jake: Hit it.
Reply With Quote
  #5  
Old 10-28-2007, 06:11 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,206
Thanks: 6,562
Thanked 2,015 Times in 918 Posts
Default

Quote:
Originally Posted by deuce_454
a stock LS1 makes what 325 Hp, so at 12 pounds that comes out at about 590 Hp with no cats ans A/C correct???
I've seen the stock GTO's at 350 hp come in at 525-550 rwhp with a good twin turbo kit, stock engine.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #6  
Old 11-09-2007, 04:58 PM
deuce_454's Avatar
deuce_454 deuce_454 is offline
Senior Member
 
Join Date: May 2006
Location: Copenhagen, Denmark
Posts: 1,612
Thanks: 0
Thanked 1 Time in 1 Post
Default

just talked to the DOT inspection guys and there is NO way i can swap in a different engine and modify it... so i guell ill sell the setup (any takers??) and do a head, cam and claim itīs stock...
__________________
Elwood:We're 105 miles from Chicago, we have a full tank of gas, half pack of cigarettes, it's dark out and we're wearing sunglasses.
Jake: Hit it.
Reply With Quote
  #7  
Old 11-09-2007, 06:31 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,206
Thanks: 6,562
Thanked 2,015 Times in 918 Posts
Default

Quote:
Originally Posted by deuce_454
just talked to the DOT inspection guys and there is NO way i can swap in a different engine and modify it... so i guell ill sell the setup (any takers??) and do a head, cam and claim itīs stock...
stick the turbo setup in the for sale section, it'll go fast.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net