LS9 Intercooler plumbing routing/help

[64pontiac]

Ok need some help from the guru's, ie Mark or anyone with LS9 experience!!!

I have a CTS-V reservoir for the intercooler system..... I am guessing it should be kept up high at the intercooler core level?

Also, where have you been sending the overflow....back to the rad overflow?

One last question....... I noticed on the Red Devil it looks like you may have epoxied in AN fittings to the stock plastic reservoir... is this what you did? If so, did you use the stock bosch pump with plastic nipples too, or did you have it converted to AN or use a different pump?

thanks alot guys! Anything helps.....