SBC 406 with LT1/T56 Transmission

[Cris@JCG]

This engine & transmission is great for 67 to 69 Camaro or 68 to 72 Nova.. The transmission was in a 68 Camaro..

406 SBC- original Chevy block
9.1 compression ratio
Lunati Rotating assembly -internal balance
Professional Products Harmonic balancer
Splayed main bearing caps
AFR cylinder heads- 195
Crower Cam- Lift int 540 exh 565 Duration @.050 int 236 exh 244 LSA 114 deg Hyd/Roller
Cower Hyd/Roller Lifers & rockers
MSD Distributor
Aluminum water pump
Power Master High torque starter
Edelbrock Air gap intake with 750 HP Carburetor or DFI complete system
Racing engine Analysis - 526 HP & 526 TQ

LT1 /T56 Transmission Rebuilt by Rockland Gear- 20k miles on rebuild
Mcleod billet flywheel with clutch & pressure plate
ATS transmission support
Driveshaft

Asking 8500.00 for everything.. have an option on intake systems.. only one set up goes with engine

Have a new set of Dynatech headers for Camaro/Nova.. additional 400.00

[CamaroBill]

Are you willing to separate? IF so, how much for the engine and headers? Bill

[Cris@JCG]

I will let go the engine with headers for 6800.00

[Rick D]

Cris, how much for the trans setup??

[Cris@JCG]

Rick- I only really included the trans set up to sweeten up the deal for somebody looking for a complete drivetrain.. If I just sell the motor by itself.. I am good with that.. Trans can be converted for an LS set up pretty easy.. & can use it on one of the shop builds

Originally Posted by badrs69

Cris, how much for the trans setup??

[Rick D]

Originally Posted by Gonzo

Rick- I only really included the trans set up to sweeten up the deal for somebody looking for a complete drivetrain.. If I just sell the motor by itself.. I am good with that.. Trans can be converted for an LS set up pretty easy.. & can use it on one of the shop builds

It's good Cris thats is what I wanted to do. Oh well I will keep looking.

[Cris@JCG]

I have to move this motor.. have an over stock of engines sitting here @ the shop...

Engine 4500.00
Trans set up 1200.00
headers 400.00

Originally Posted by Gonzo

This engine & transmission is great for 67 to 69 Camaro or 68 to 72 Nova.. The transmission was in a 68 Camaro..

406 SBC- original Chevy block
9.1 compression ratio
Lunati Rotating assembly -internal balance
Professional Products Harmonic balancer
Splayed main bearing caps
AFR cylinder heads- 195
Crower Cam- Lift int 540 exh 565 Duration @.050 int 236 exh 244 LSA 114 deg Hyd/Roller
Cower Hyd/Roller Lifers & rockers
MSD Distributor
Aluminum water pump
Power Master High torque starter
Edelbrock Air gap intake with 750 HP Carburetor or DFI complete system
Racing engine Analysis - 526 HP & 526 TQ

LT1 /T56 Transmission Rebuilt by Rockland Gear- 20k miles on rebuild
Mcleod billet flywheel with clutch & pressure plate
ATS transmission support
Driveshaft

Asking 8500.00 for everything.. have an option on intake systems.. only one set up goes with engine

Have a new set of Dynatech headers for Camaro/Nova.. additional 400.00