Getting it on the ground..

[TheChief]

Guys,

only my second post here so i apologise if i've missed anything!

I have ordered some American racing T71r's for my 68 camaro. These are 17x8 on the rear as I have had rubbing issues and am running a stock tub with a 2 inch drop. I will most likely shod these in 9 inch tire.

However, I am potentially look to procharge my 383 stroker to the tune of around 500 - 600 bhp next year.

I am going to have trouble getting that power on the ground running a 9 inch tire?

cheers

Jonny

[fleetus macmullitz]

Jonny,

Yes, you'll have issues getting it to the ground if you raise the hp level that much.

Have you thought about putting the wheel order on hold?

[TheChief]

I have thought about it, however, i was under the impression that I'd most likely need to mini-tub to fit anything bigger anyway? Which over in the UK, along with all the associated costs etc would cost me around $9,000 all told

[fleetus macmullitz]

Originally Posted by TheChief

I have thought about it, however, i was under the impression that I'd most likely need to mini-tub to fit anything bigger anyway? Which over in the UK, along with all the associated costs etc would cost me around $9,000 all told

After hearing this procharger equipped beast a few times



...I can see the appeal in adding that brand supercharger to your 383.

A few suggestions ... maybe some of them will help.

With a confidence to pick up new skills over time during your build, perhaps you could find a hobbyist who has done this mod to their own car that would be willing to share their time and knowledge with you.

If that doesn't pan out, reference a good fabricator that will work within your budget. That and take added time till your find that parts you need at YOUR price.

You know the old saying, 'Where there's a will, there's a way.'

[darrinf]

I have the T70R 17x9 5.5" bs with stock tubs and 2" drop springs. No rubbing issues whatsoever. 255/45 tires. There's probably another 1" clearance between the tub and inside tire.