Mig selection narrowing to HTP mig200

[Roberts68]

I am open to comments for and against but the short story is I am leaning toward a HTP mig200 from USAWELD
I have been watching Craigslist for months, mostly for Miller machines because I have actually never used anything else. My last 2 employers had 251/252's so in 17 years that is all I have used. While I do not weld all that often I am one of 2 that do where I work now.

At this time I do not see myself doing much beyond some structural mods to my subframe, DSE Sf Connectors and replacing my trunkpan. Eventually there could be more sheetmetal work and I am sure opinions will fly that a TIG is the answer there but I don't feel the urge for the investment or learning curve. Right now time is very short for me and I like my "point and shoot" comprehension and comfort level with MIG.

As per usual the typical projects are endless for carts, benches and the like. My space is limited with a 2 stall garage devoted to the Camaro but in the time I own a welder that is likely to change. At the least I will add a stall, and if the market turns around I would buy or build a different home with a spacious shop + garage instead of making due as I have.

There is some temptation to get an HTP MIG160 but the additional investment is not that great compared to changing machines down the road, usually at a loss. Besides that, it goes against the Tim Taylor philosophy so many of us benefited from watching TOOL TIME. oh,Ho-OH!