Muscle Car Metal

[lsuguy]

Hey guys. Wanted to see if any of you have any experience or know anything about Muscle Car Metal (see link below). I am trying to find a decent shell to start a build with. Thanks in advance guys!

http://musclecarmetal.com/1968_CAMARO_BODY_SHELL.ASP

[mitch_04]

Well, the fact that they coat in POR-15 worries me. Why not use a reputable epoxy or etch primer? POR-15 needs another topcoat binder to accept base coats. Maybe I'm missing something...

[71RS/SS396]

Find a body then send it to the AMD Installation Center. I've sent 2 cars to these guys. They build the body just like GM would, everything is spot welded and assembled on jigs, the body literally looks like a brand new fresh body from GM. They have no problem doing mini tubs and subframe connectors during the rebuild process, heck they even did the mods for the quadra-link on the last one for me.
http://www.amdinstallation.com/

[lsuguy]

Thanks for the feedback Mitch. I shot him an email to get more clarification but I would assume that the new body panels he is using are being left in the primer they come from the AMD, Goodmark, etc.

[dhutton]

He has been building those shells for many years and I have never read anything negative about his work.

Don

[GMTILT]

AMD is good stuff, I use it all the time, if you get a car body in edp coating just get it media blasted and then you can sand it real good and put down a nice coat of epoxy, I agree stay away from por-15 !