Project FNQUIK

[E.rodz]

come one Wayne you can't just look at the sexy you have to dive into it!! power tour is in a couple of months lets go put some miles on this old girl with new bolt ons!

[waynieZ]

Eric I Did a little on the car today took out the hydraulic clutch slave cylinder and reservoir, and the pedals. Then the steering column came out. Did about half hour of wiring and tried to figure out the DSE V/A bracket. Anyone have a picture of the DSE Vintage Air bracket mounted in a 69 Camaro? Not much but it was warm enough to get some heat in the garage, laying on the cold floor in the car gets old fast.

[John510]

Oh wow Wayne. Theres nothing like unwrapping all the cool new toys. Install it and let us hear it rip!

[waynieZ]

Thanks everyone

I'm trying John, I'm trying!

I'm going to post in Garage equipment, but has anyone used the Mac's Pivot with the adapter for LS engines? They used it on 48 hour Corvette. This is my big hurrah as far as big projects go so its a big outlay of cash for one build. I don't want to be cracking the engine open then have a problem only to have GM say its from pulling the super charge off to install it in the car.
I also saw some brackets that bolt to the ends of the heads in a GM video but don't know if someone sell anything like it.

Let me know your opinions.

Thanks

[grendel]

Originally Posted by waynieZ

Thanks everyone

I'm trying John, I'm trying!

I'm going to post in Garage equipment, but has anyone used the Mac's Pivot with the adapter for LS engines? They used it on 48 hour Corvette. This is my big hurrah as far as big projects go so its a big outlay of cash for one build. I don't want to be cracking the engine open then have a problem only to have GM say its from pulling the super charge off to install it in the car.
I also saw some brackets that bolt to the ends of the heads in a GM video but don't know if someone sell anything like it.

Let me know your opinions.

Thanks

Buy it and sell it to me when you're done.

[waynieZ]

Originally Posted by grendel

Buy it and sell it to me when you're done.

Your close John you can use it when you need it!

[grendel]

Originally Posted by waynieZ

Your close John you can use it when you need it!

I can invert that, I can buy it if you like and you can borrow it?

See, I do about 10 engines a year

[waynieZ]

I just ordered it last night from Summit racing, I got the x tall one. Maybe I can rent it out to other guys like me that only need it for one job.
Thanks for the offer.

[waynieZ]

I ordered my Mac's pivot leveler and adapter for the LS engines. Summit had the XX tall adapter for $119 so I ordered it on the 18th. Today I get an E Mail from them saying they no longer make that one and they could give me the X tall one for $149, so I called and told them they charged my card then they can't get it and now they want $30 More for this one, which is the right price for it. They put me on hold and come back and give the more expensive one for the original price of the cheaper one. I thought that was pretty stand up of them. I was just hoping for a small discount.

I also got my VaporWorks controller for the CTS V fuel module, It looks like a very nice well made kit. One more fitting and the tank will be ready for when I need it to go in.

[waynieZ]

Rummaged around and found some AN fittings and bought some to plumb up my Fuel module for the VaporWorks tank today only need a small 3" piece of -8 PTFE hose to connect the corner pickups and I can install it in the tank. Tried it to see how its going to work.



To this


This is the outside setup.



and in the tank for mockup