5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!!

[syborg tt]

Good Morning All,

I would like to introduce myself my name is Marty. I have been working on this project for the last couple years. This truck was supposed to be a daily driver as my other Syclone is one of the Ten trucks that Marlboro Cigarettes gave away in a contest in 1991.

I purchased a Sonoma GT so I could build it to drive. However with all projects they sometime start with good intentions and then end up on a completely different path.

Currently the truck is at the chassis shop having the complete back half redone so we can fit the new tires. 295 45 20. The chassis is going to be set at 6 1/4 in the rear and 5 3/4 in the front at it's lowest point. Front Suspension is by Air Ride and the rear suspension was hand fabricated by Dave at Competition Fabrication ( www.compfab.com ) . The rendering was done by Bob Thrash at Rad Rides by Troy. All of the other idea's have come from me. I have searched the Internet over the last four or five years studying everyone else builds and idea's. I have learned so much from Forums like this and the bad part is it has cost me so much money because I want to emulate most of the idea's that i've seen.


The build of this truck is broken down into 24 stages and I hope to have it completed for the 2010 Indy Good Guys.

Currently the truck mods include:
18 x 8 & 20 x 10 Billet Specialties Wheels
BF Goodrich KDW-2 Tires
Currie Aluminum 9"
Wilwood Disk Brakes
Vintage Air
Billet Specialties Serpentine System (wow is this a nice piece)
4.3l All Aluminum Twin Turbo V6
4L80E Transmission
Big Stuff 3 w/Trans Controller
8 Point Roll Cage
Recovered Factory Interior in Viper Leather and Suede

There are so many other mods that I can't even list them all.

here are a few pics.

[T Bell]

I've always been abig fan of the Syclones & Typhoons. Looks like you have a wicked plan.

[907rs]

Welcome Marty! Cool project you have going on there. What performance/horsepower goals are you shooting for?

[syborg tt]

Originally Posted by 907rs

Welcome Marty! Cool project you have going on there. What performance/horsepower goals are you shooting for?

Thank you

We are shooting for 600hp @ 12lbs of boost. My goal is to make a dependable driver which will go the distance on the Power Tour. I want to have fun and not worry about breaking things.

[D Rock]

Looks good, plenty of room for the turbo setup. What size turbos are you using??

Nice truck

[syborg tt]

Originally Posted by D Rock

Looks good, plenty of room for the turbo setup. What size turbos are you using??

Nice truck

GTQ 32, 51 Trim, 58 Tangenal Exhaust Housing

[black2002ls]

awesome. i've got an 89 s-10 that i have in the works. i'd love to see some pictures of your rear suspension set up. im thinking more along the lines of a built 12 bolt tho. and a 6 liter LS1

[907rs]

Originally Posted by syborg tt

Thank you

We are shooting for 600hp @ 12lbs of boost. My goal is to make a dependable driver which will go the distance on the Power Tour. I want to have fun and not worry about breaking things.

Should be fun!

[XcYZ]

Welcome Marty, that's a cool project.

[syborg tt]

Good Evening all,

It looks like Bob Thrash & Kenny have been going at it all day.

Just a Quick teaser shot of the top color of the truck.



www.belltechcorp.com