Synister bracket diagram.

[rich-allen]

My synister belt drive didn't come with instructions. I called and left sevral messages but I haven't heard back from them yet.

If someone has a good picture of the power steering and AC area, I can finish it without the instructions.

Using pictures from Jody and Scott's cars I managed to get this far.






Thanks in advance,

[camcojb]

There is a bolt missing in the second pic, at the left side of the pic. It goes from the housing into the front of the head.









Jody

[rich-allen]

Thank you Jody.

Rich

[rich-allen]

One last thing,
the little idle pulley below the AC.. after tightening, mine has a little play.
It doesn't seem right. is your tight?

[camcojb]

Originally Posted by rich-allen

One last thing,
the little idle pulley below the AC.. after tightening, mine has a little play.
It doesn't seem right. is your tight?

How much play and where? Here was my issue, evidently the timing covers are not all the same thickness and mine was .100" shorter on my LS2 than what they used to mock up with. They were making me a longer support to compensate.




Jody

[rich-allen]

The arrows represent the pulley and the approximate amount of play it has.