What late model booster m/c fits a 1st gen Camaro?

[69MyWay]

Hey guys, for my 69 Camaro with C5 front brakes and 2001 F body rear brakes, I need to know what late model Master Cylinder and Brake booster is the most direct fit to the stock 69 pedal....AND,

What else is needed to connect it?

If you guys remember, I hid a non-power master cylinder in the side cowl of my 69 to have the ultra flush firewall.

Well...I am going to be driving the car a lot more in the future as a daily driver situation and need more brake assist.

PLEASE - part numbers, fitting issues...etc, would be Very helpful.

[69MyWay]

Hey guys...I'm going to venture out on a limb.

I found a place selling GTO boosters and m/c for $35 plus $20 S&H.

I have one coming.

It has a different look than the typical C5/6 or 4th gen F body unit.

We'll see if it works. If not, I talked to Frank at Prodigy and will just get one of his stainless units, then scotch bright it up to get the bling down to a machine looking finish and set that up on the car.

[XcYZ]

Originally Posted by 69MyWay

Hey guys...I'm going to venture out on a limb.

I found a place selling GTO boosters and m/c for $35 plus $20 S&H.

I have one coming.

It has a different look than the typical C5/6 or 4th gen F body unit.

Post a pic when you get it, I'm curious what it looks like.

[69MyWay]

Here are pictures from an ebay ad.

[jski67]

69MyWay...sent you a pm.

Jason

[69MyWay]

The booster will be here this week.

I also have a 4th gen Camaro one coming so I can compare/contrast.

I see there isn't much room between the engine and booster - thus the need for the small diameter.

We will see.