3 inch or 2.5 inch exhaust - Lateral-g Forums

akrapovic · #1 09-13-2007, 05:51 AM

I've received conflicting advice. I have a 396/402 BB, I've been told 3 inch is the only way to go for a BB. Others have said 2.5 in for correct back pressure.

Thanks in advance.

**XcYZ** · #2 09-13-2007, 06:08 AM

For performance, 3" without a doubt.

70gotboost · #3 09-13-2007, 09:40 AM

I was "told"... more than 383 ci, go with 3". Or ANYTHING supercharged/turbocharged needs 3".

jski67 · #4 09-13-2007, 10:17 AM

I've also read that 3 inch to the mufflers with 2.5 tailpipes is fine.

Supposedly, flow isn't affected much by the smaller pipe after the mufflers and 2.5 is a lot easier to bend and package.

I've got a tri 4-bar in my car, so I may go this route...

Jason

rocketman · #5 10-07-2007, 03:43 PM

Manderal bent is the only way to go, If it's less than say 450 hp 2.5 will be fine. over that I prefer 3 inch

COYBILT · #6 10-08-2007, 05:12 AM

Depends on how pumped the motor is. If stock I would go with 2.5 inch or even a mild motor. If the thing has a large duration cam, good set of heads and header go with 3 inch.

Bad94 · #7 10-19-2007, 04:45 PM

I would do 3"

Quote:

Originally Posted by 70gotboost

I was "told"... more than 383 ci, go with 3". Or ANYTHING supercharged/turbocharged needs 3".

LOL, we have 3.5" on a turbo V6. from turbo to rear bumper

vinz68 · #8 10-20-2007, 06:08 AM

I have 3" ovel x-pipe and mufflers, than changes to 3" round for tail pipes. I have a 496bb with 650 hp. sounds great and seems to work very good.