How many times have you changed directions with your project?

[whytry]

I always wanted to know how many of us have changed directions with our cars. I'll start.

Started off as daily driver, then got a commuter for school - that was 1995, then put a LT1 in it and drove it all the time when not going to school. Then I discovered drag racing, added a bottle, changed heads, cam, etc, bigger bottle then it broke several parts, tranny's rearends, and finally the motor.

In 2000 I decided to go with a 468 a friend sold me for $150, what he owed the machine shop for labor, then they built the motor for me with a bottle in mind, had full manual valve body, 4500 Coan stall, and a brake, it was awesome @ the track but horrilbe to drive almost anywhere. Then I discovered PT, and then it really changed directions. I went from drag racing everything to more of the PT stuff over the next couple of years. Sold the Welds, TH400, suspension and bought 18" Budniks, TKO-600, coilovers, rebuilt the front suspension etc. Now its 2008 and my project is now Procharged with the F1R, thanks Frank, I think its tuned pretty close thanks Jody, and runs pretty good, and I'm happy. But then I got the bug again on here and PT to look at the Gbar or Quadralink setup, thanks to pretty much everyone here for getting me going on this, and also EFI, partially thanks to Jody and the many conversations I have had with him about it...... Oh yeah I'm also starting to think about changing to the LS motor and using my Procharger on that.... It never ends.... 1st pic is how I bought it, and how it sits now.

What's your story?

[TravisB]

3 sets of wheels
3 sets of brakes
4 transmissions
3 motors
2 different kinds of front suspension

and the car is not even far enought along to say that I started it.....lol

[Payton King]

From the start of the build until it was finished

4 sets of wheels
4 motors
2 sets of brakes
2 different sub frames
2 sets of seats
2 different rear ends

and the car did not drive during all of those swaps

[XcYZ]

I have no idea what you guys are talking about.

[BallnRods]

I think I change my mind on one thing or another every week....

[rjsjea]

This topic is right up my alley.........and its a mopar!!

3-front suspensions
2-transmissions (still flip/floppin)
3-rear suspensions
1-engine, but cam/heads been changed

[rwhite692]

Originally Posted by XcYZ

I have no idea what you guys are talking about.

Me neither, Scott! LOL

[melman109]

Had plans on building my car back to stock specs, untill I stumbled across this site . Almost everyday I learn/see something new from this site that I want to add to my car. But I'm scared to buy parts, in fear that I'm going to see something better the next day