will this pan work?? - Lateral-g Forums

aany001 · #1 08-08-2010, 07:18 PM

Guys I was wondering will a LS Hummer oil pan have enough clearance for my LS1 swap in my 69 camaro with a stock frame and with a unisteer rack??

SLO 65 · #2 08-08-2010, 07:27 PM

There's a good "sticky" on LS1 Tech in the Hybrid/Conversion section that has all of the dimensions for the different LSx pans. The Hummer pan is 7.5" deep vs. 5" for the F-body and LS2/3 Corvette pans. I don't know if either will clear the rack.

Nick

ProdigyCustoms · #3 08-08-2010, 07:40 PM

They are dangously deep and serious threat of high centering

aany001 · #4 08-08-2010, 07:44 PM

Quote:

Originally Posted by ProdigyCustoms

They are dangously deep and serious threat of high centering

Sorry Frank what do you mean? Are you meaning ground clearance will be an issue??

aany001 · #5 08-08-2010, 07:47 PM

I was talking about the 2008 H3 Hummer pan.

aany001 · #6 08-13-2010, 05:07 PM

anyone else run this pan and worked for them?

aany001 · #7 08-08-2010, 07:43 PM

just went to the garage and compared the measurements to my 96 chevy small block's oil pan that was in the car with the rack and the measurements are almost identical.Looks like it will fit perfectly without any mods.Heres hoping and will let you know this sat when my new drivetrain arrives.Anyone knows if the dimensions of a conventional chevy small block are similar to the LS1 as in where they sit in the frame??? If they are close this will work.I had tons of room with my old engine in there!!!