1482 hp small block chevy for hot rod - Lateral-g Forums

TOM NELSON · #1 03-08-2006, 06:03 PM

We just finished David Frieburgers twin turbo small block for project f-bomb we plan to run this car at drag week.The motor made 1025 hp and 980 ft lbs on 91 octane and 1482hp at 5600 rpm and 1441 ft lbs of torque.we actually had about 200 hp more in the motor but the 83 lb injectors were stuck open at that point.This is is a totally streetable combo as a matter of fact the cams advertised duration is 266 seat to seat.We got a ton of video during the testing.we made over 31 pulls above a 1000 hp.I'm going to convert the video and post it when were done.Nelson Racing Engines

TOM NELSON · #2 03-08-2006, 06:08 PM

more pics

**camcojb** · #3 03-08-2006, 06:19 PM

very cool Tom.

Jody

**XcYZ** · #4 03-08-2006, 06:51 PM

Awesome. Just awesome. Can't wait for the video.

**Ummgawa** · #5 03-08-2006, 07:46 PM

Wow, man. I just soiled myself.

**XcYZ** · #6 03-08-2006, 07:49 PM

Tom, how much boost and total timing for both the 91 octane pulls and the all out pulls on the dyno?

TOM NELSON · #7 03-09-2006, 09:47 AM

The Motor Made 1025 Hp At 14 Pounds Of Boost And 32 Degrees Total Timing.5900 Rpm 1482 Hp At 29 Pounds Of Boost And 32 Degrees Timing 5600 Rpm.but Trust Me When You See The Video When The Motor Hits Beyond 1000 Hp It Jumps The Hp So Fast Its Hard To Read The Gauge It Would Have Made 1600+ But The Air Fuel Would Go From 11 To 1 To 13 In A Heart Beat So We Kept Having To Shut The Run Off Early.the Goal For David Was To Make A Streetable 1000 Hp And We Did That On Pump Gas .he Was Stoked.

Turbo Deuce · #8 03-14-2006, 04:33 AM

Quote:

Originally Posted by TOM NELSON

The Motor Made 1025 Hp At 14 Pounds Of Boost And 32 Degrees Total Timing.5900 Rpm 1482 Hp At 29 Pounds Of Boost And 32 Degrees Timing 5600 Rpm.but Trust Me When You See The Video When The Motor Hits Beyond 1000 Hp It Jumps The Hp So Fast Its Hard To Read The Gauge It Would Have Made 1600+ But The Air Fuel Would Go From 11 To 1 To 13 In A Heart Beat So We Kept Having To Shut The Run Off Early.the Goal For David Was To Make A Streetable 1000 Hp And We Did That On Pump Gas .he Was Stoked.

Nice power! I read pump gas, but I see 32 degrees of timing at 29 psi. Can you go into a little detail? That seems high on C16, and I read pump gas.

**syborg tt** · #9 03-14-2006, 06:45 AM

the more i read about you the more i am considering sending you my v6

Speedster · #10 03-14-2006, 08:04 AM

Quote:

Originally Posted by syborg tt

the more i read about you the more i am considering sending you my v6

Marty -
I would highly recommend sending Tom your V6. You will be happy you did. Tom makes "good" power, meaning high and long term.