which master are u using

[comp-spec]

Im running wilwood 6 piston front and wilwood rears. What master are u using (non power). Trying to get rid of a hard pedal.Brakes are up under the dash so space is tight.

[TravisB]

I have one of wilwoods pedal kits.....for my car! Do you need the bore size???

[comp-spec]

Trivis
Im running a wilwood now 1in bore and the petal is too hard ,going to try a 7/8 and see if its any better. Just wondering what every one is using with (non power) big brakes .

[awr68]

I have the Wilwood 6 piston (front) and 4 piston (rear) set and was told to use a 1 1/8" bore for non-power, so I bought a late model S10 master, hope it works!!

[comp-spec]

Originally Posted by awr68

I have the Wilwood 6 piston (front) and 4 piston (rear) set and was told to use a 1 1/8" bore for non-power, so I bought a late model S10 master, hope it works!!

awr68
I was told to use a smaller bore (7/8), who told u to use a 1 1/8 ??

[4mm]

Use a smaller bore for lighter pedal feel. I have a 7/8 on six piston wilwood fronts and the pedal is still very hard to push.

[awr68]

Originally Posted by comp-spec

awr68
I was told to use a smaller bore (7/8), who told u to use a 1 1/8 ??

It was either Wilwood or Precision...pretty sure it was Wilwood though....
Does the stroke have anything to do with it??? (Allan leave that one alone!!)