Fuel rail connecter

[fishface]

Hi, getting some ideas on the best connector for my ls3 fuel rail. I will be using ptfe flexible hose and have rotated the fuel rail to put the coñnection on the passenger side. Will I need a 90 degree connector here as the bend in the hose would be extreme if running parallel with the fuel rail?? Any help appreciated.

[Che70velle]

You'd have to bring the fuel line up behind the engine, in order to need a 90 degree fitting. I flipped my fuel rail, as you are, and I ran my fuel line along the frame, onto the inner fender (strapped of course), and right into the fuel rail.
This is a straight fitting with -6 PTFE hose.

[Vega$69]

I ran mine pass side the behind engine ito 90* fitting at fuel rail.

IMHO cleaner then flipping the fuel rail.

[Che70velle]

That looks great Vegas! My objective was to keep the fuel line away from heat sources as much as possible. Your way does look cleaner though.

[fishface]

Thanks for the responses and pics guys!! I can see what I am going to do.

[randy]

Originally Posted by Che70velle

That looks great Vegas! My objective was to keep the fuel line away from heat sources as much as possible. Your way does look cleaner though.

do as vegas did or get a billet fuel rail.

[Jimmy Sean]

I uses one of these. https://www.techafx.com/catalog/50

[BBC71Nova]

This looks great. Are those -6 lines connecting the rails?

Originally Posted by randy

do as vegas did or get a billet fuel rail.