Are there any A-bodies ('67 preferably) using SC&C control arms with the ATS spindles? If there is, can you give me your thoughts about their setup? Thanks!
I have their Stage II package, which includes the SPC adjustable arms, and Howe Tall-Balljoints.
Great quality, and design The only downside is there is no bumpstop (not really needed in droop anyway) and you may have to grind a notch in your UCA mount on the frame.
Overall, I'm very satisfied, and SC&C was a great company to deal with.
Oh yeah, sorry I wasn't thinking. For a second I was thinking that the coil over shaft bolts into the upper control arm, but in reality it bolts into the spring pocket on the frame. My bad.....
Just a quick note. We offer the AFX tall spindles and our adj. upper arms as a package, StreetComp-AFX. They`re a great combination. Also one `64-`67 A body there`s usually no trimming required at all. Mark SC&C
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
SC&C A-Body Control Arms????
The only downside is there is no bumpstop (not really needed in droop anyway) and you may have to grind a notch in your UCA mount on the frame. 
Hybrid Mode
