dyno time - Lateral-g Forums

nowwhat · #1 11-19-2006, 07:56 PM

Well....My....ummm....Mark's.....umm....my and Mark's Vette get's here Wed morning....

Taking her in for a quick dyno tune.....with it's current mods.....what is the RWHP guess....????

https://lateral-g.net/sidelnyk/

Per Mark's advice...I will be replacing the side pipe inserts to a more free flowing design....(the brand new ones from Hooker)....not the reverse flows....suppose to be the same hp as a straight pipe....

black2002ls · #2 11-19-2006, 08:28 PM

400 at the wheels??

Mecom Racer · #3 11-19-2006, 09:33 PM

It's your Vette now. I'll take credit for building it, but I'm actually not the only builder. My buddy Andy put in almost as many hours as I did.

With a good tune and a less restrictive exhaust my guess is 405 at the wheels.

Which Hooker inserts are you talking about? It already has Hooker inserts. You may want to look into the spiral inserts: http://www.spiralturbobaffles.com/ordering.html

nowwhat · #4 11-19-2006, 09:50 PM

Quote:

Originally Posted by Mecom Racer

It's your Vette now. I'll take credit for building it, but I'm actually not the only builder. My buddy Andy put in almost as many hours as I did.

With a good tune and a less restrictive exhaust my guess is 405 at the wheels.

Which Hooker inserts are you talking about? It already has Hooker inserts. You may want to look into the spiral inserts: http://www.spiralturbobaffles.com/ordering.html

these new ones......
http://store.summitracing.com/egnsea...5&autoview=sku

researched the spirals....want to give these a chance.....

FunkyNova66 · #5 11-19-2006, 09:59 PM

400 to the wheels would be sweet. Doesn't matter what it dyno's to the rear wheels as that car is SCHWEET. Good gawd.

Let us know regardless.

black2002ls · #6 11-19-2006, 10:31 PM

400-415 would be normal. A stock LS1 will lay down 330-345 in a stock Camaro. With those mods you should be right there around that 400 mark

Mecom Racer · #7 11-20-2006, 07:05 AM

Quote:

Originally Posted by nowwhat

these new ones......
researched the spirals....want to give these a chance.....

Looks like they've improved their design. You'll still have to cut them at both ends at the welds to slide the guts from the main outer tubing. The sidepipes on the Vette are 3.5"

nowwhat · #8 11-20-2006, 09:04 AM

Quote:

Originally Posted by Mecom Racer

Looks like they've improved their design. You'll still have to cut them at both ends at the welds to slide the guts from the main outer tubing. The sidepipes on the Vette are 3.5"

I remember you said that is how you did it....will let you know.....