Project "Aftermath" 1969 Custom Camaro in a box!!

[fletcherscustoms]

Call me with any question 229-221-4690 or email [email protected]

Here we go!!

-1969 Camaro Coupe, original X-55, 350/3 speed SS car, have title , vin, trim tag, hidden vins, etc. Two big boxes of original bolts, brackets, etc $$23,000

-**Car has no suspension or subframe.

-Sheetmetal replaced-- All panels where stipped of original EDP coating, sprayed with bed liner on inner sides, and all panels are covered with PPG epoxy
-Both full Dynacorn quarters
-Dynacorn tail panel
-Dynacorn roof skin
-Dynacorn roof structure supports
-Goodmark outer fenders
-DSE mini tubs
-Goodmark one piece trunk pan
-Goodmark one piece full floor
-Mike's Custom cars full frame rails
-Goodmark rear filler
-NOS package tray
-Dynacorn full inner and outer Rockers
-dynacorn complete dash assembly
-Dynacorn complete firewall, with both tulip panels
-Goodmark cowl panel
-Goodmark RS front fenders and lowers
-Goodmark? inner front fenders
-Goodmark upper and lower front panels
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights
-if it was available it was replaced. this is as new of a car as you can get

-Exterior Accessories, all new in box, most never opened

-Marquez billet side marker lights $55
- Modern Taillights $210

-GP superstore Smoked glass kit $550











-Wheels and Tires $4250
-Intro Id Luxury 307 wheels, 3 piece wheels, with chromed hoops and black poweder coated spokes
-18x8 front
-20x12 rear
-335/30/20 tires new

Drivetrain- $10,200 for motor

-Brand spanking new, built by Dave Diluca 402" LS2, motor is good for 850+ HP, and will make 525+ as is at the rear wheels
-LS2 4.00" block
-Block clearanced for rods
-Hone w/ torque plate
-Line hone
-knock sensor tapping and sensor
-ARP main studs
-Eagle 4.00" 4340 crank
-Lunati Billet 6.125 rods
-Custom pistons/rings/pins
-internally balanced
-Custom Comp cam
-Morel lofters
-JP double chain
-ported oil pump
-valley and front covers
-lifter trays
-rear cover
-AFR 225cc CNC heads
-Cometic gaskets
ARP bolts throughout
-Comp pushrods
-Billet valve covers
-all sensors installed

-**Harrop Engineering Hurricane intake $3800

-ATS oil pan $

-Custom Built 750+ torque T56 from ATS $3450
-Mcleod Street Twin Clutch $1925
-ATS install kit, with firewall bracket and modded GM hydros $450

[fletcherscustoms]

Here are a few pics and there are tons more at www.fletcherscustoms.com under projects

[fletcherscustoms]

[youthpastor]

sorry to see it go, hopefully they will finish it as intended

[fletcherscustoms]

As of May 6th, 2007 Everything is officially for sale!! If you have posted or PM'd please resend PM with exactly what you want and your offer. This is not a Yard sale so I am not gonna give stuff away!

Please contact me before sending any payment!

Payment by Paypal plus 3% to [email protected]

Or to Chad Fletcher
PO Box 35
Coolidge, GA 31738

[slownova]

how much for this stuff if your parting it out? PM me if you want.
-short/long block?
-rims,tires?
-ATS Stainless Steel Road Race headers
-ATS oil pan
-Custom Built 750+ torque T56 from ATS
-Mcleod Street Twin Clutch
-ATS install kit, with firewall bracket and modded GM hydros
-DSE Stainless narrowed tank with intake Aeromotive pump
-Hydroboost with install kit and lines

[tyoneal]

Chad:

Please quote me on these items as well:

-Marquez billet side marker lights,
Modern Taillights,<---- (Which ones? Std. or the RS Marquez ones)
Billet front turn signals
-GP superstore Smoked glass kit
-DSE Firewall fill plate
-DSE core Support close out

-American Autowire Classic update kit, and Sequential tailight kit

-Electric Autolife front and rear power window kits, 4 door billet BMW style switches, and Billet wire looms

-DSE bright driver headlight kit

Which Dash do you have? (With or without a/c vents)

Please send to:

[email protected]

I also sent a couple of PM's

Thanks,

Ty O'Neal

[GEORGE SANCHEZ]

You Have Mail

[Kevin]

Easy to work with and parts recieved the next day. Just went out of his way to go the extra mile. Nice doing business with you!! It goes to a great cause in order to expand his business and passion for hot rods.

Thanks again,
Kevin
Oxford, Ga

[Mr.VENGEANCE]

hey Chad

dont forget to mark the body mounts SOLD!

thanks!