Are there any tips to drilling axle shafts for larger wheel studs?

[Apogee]

Originally Posted by thedude327

If your drilling out for larger wheel studs and using the press in studs, what amount of interference fit do you need between the knurl of the stud and the new hole? Is there a spec. for this?

Thanks again for any replies
Paul

.007" to .010" interference fit with the extended length ARP studs works well in steel. We'll double that in aluminum.

Tobin
KORE3

[thedude327]

Thanks for the info. !!

Paul

[Bad Bowtie]

Paul,
Here is a link for Moroso wheel studs. In the description of the studs are the specs for the hole diameter hope this helps.

http://www.moroso.com/catalog/catego...?CatCode=25107

BB

[thedude327]

Originally Posted by Bad Bowtie

Paul,
Here is a link for Moroso wheel studs. In the description of the studs are the specs for the hole diameter hope this helps.

http://www.moroso.com/catalog/catego...?CatCode=25107

BB

Thanks for posting this link !! I made a printed copy for future reference. This is one of those things where having a handy ref. chart is a huge time saver.

Paul